Operator`s manual

Model VR240 Audio Logging Recorder
January 2000
5-41
NOTE
The VR240 will now search for 30 seconds back from the command time. Then it will begin
playing on the channel selected.
You may now use the
Pause, Rewind
and
FastForward
soft keys or transport controls to
review the selected material.
NOTE
• The rewind and fast forward speeds can be increased up to
three increments by pressing the soft key or transport control
key.
• Pressing the
Pause
soft key toggles
Playing
and
Paused
on
the VFD display after
Recall.
c. To end your Instant Recall session, press the
Quit
soft key.
5-27. SET MEMORY LOCATION.
While recording or playing back on a drive you may mark a search point by using the
SetMem
(set memory) function. This selected point can be used as a search criterion when playing back
from the drive.
NOTE
This is not a permanent mark on the media. Once you have
ejected the media or disk, the mark is lost.
5-27.1 To set a memory location.
a. Press the
Drive
soft key until the recording archive drive is shown on the top line of the
VFD display. Play the drive and listen for the location you wish to mark. Once you reach
the desired location, press the
SetMem
soft key.
LOWER: Recording 10:03:00 29Feb2000
< Controls
SetMem
SaveMessage Recall >