Operator`s manual

Model VR240 Audio Logging Recorder
E-2
January 2000
machine, a new serial number will be assigned. The start and end time and date is taken from
the index on the media, and is normally the allowable range for SEARCH operations on that
media.
*The AC adapter we provide is for 115V, 50/60Hz only. If you will be using the printer on 230V
and wish to purchase it from us, you will have to acquire an appropriate adapter locally. The
adapter is rated 12VAC-1Amp output.
A label will be printed automatically when media is recorded and then ejected. If you want to
print a label without recording or ejecting, the following control sequence allows you to do so:
Press the
Controls
soft key, then the
>
(next) soft key, then the
Label
soft key. A label will
immediately be printed. (It takes the better part of a minute to print; during this period the
legend “Label Being Printed” will appear briefly on the display.) There are several
circumstances under which the label will not be printed:
If the printer is not connected or powered up, or,
If there is nothing to print, e.g., if there is no index (nothing recorded) on the media, or if
no media is loaded, the
Label
soft key will disappear and the menu will revert to
Ready.
If you don’t want to print a label after recording and ejecting, simply turn off the printer.
E-2. USER-DEFINED TITLE.
You can “personalize” the labels printed by the label printer with your station’s call letters or any
other legend of up to 11 characters.
Access the “word processor” from the
Config
menu as follows:
a. Press the
Config
soft key key.
b. Press the
>
(next) soft key three times.
c. Press the
Label
soft key .
Cursor
: Moves the underline cursor forward through the 11 possible character positions
of the title. (Prev. moves the cursor backwards.) The cursor “wraps around” if you
exceed the title boundary.
LABEL TITLE:
Cursor Increase Decrease Done