Operator`s manual

Model VR240 Audio Logging Recorder
January 2000
2-5
e. Wait for the second hand to come around to the minute and hit the Set soft key. (Or, if
you made a mistake, hit Cancel and start over.) The clock is now set. If you are running
on Greenwich Mean Time or UTC, you can set the clock to that instead of local time. To
exit this menu without re-setting the time, press the Cancel soft key.
NOTE
The display will give you the time and date as stored in the
VR240. This may be accurate, or completely incorrect if never
set. The VR240 uses 24-hour time and the “European” method of
giving the date as DAY/MONTH/YEAR.
2-3.5 Setting Up Input Channel 1 for Recording.
a. Press the Config soft key. (NOTE: Config is not available in hard disk menu. Use the
Drive soft key to select either the upper or lower drive.)
b. Press the > function key.
UPPER: Not Ready
Controls SysInfo Drive
Config
NEW TIME: 15:28:15 29-Feb-00
Set
Cancel
CONFIGURATION:
< Clock Descriptors System Quit
>