Operator`s manual

Model VR240 Audio Logging Recorder

2-10

January 2000

e. Then press the

All

soft key.

f. Press the Enable soft key

g. Press the number “

” on the keypad followed by the

Enter

soft key.

If your signal source is not on, turn it on now. The top row of LEDs on the Channel Status array

serves as a level indicator. Adjust the output level of your signal source

so that the input signal

to the VR240 is as high on the “meter” as possible without “clipping”, as indicated by red LEDs

on the right of the array. It is OK if the rightmost set of asterisks flashes occasionally. (When

the Monitor menu times out or you hit Done, the “meter” is disabled, and that line of the display

reverts to its normal function, described in detail later on.) You can now hear your signal source

through the VR240 speaker.

CONTROLS:

All

Thru

Enter Done

Monitoring: All channels disabled

Enable

Disable Done

Enter channel #:

All Thru

Enter

Done