Operator`s manual

BEFORE YOU BEGIN
FOR RELIABLE OPERATION OF THE VR240, PLEASE CLOSELY
REVIEW THE FOLLOWING PROCEDURES AND CHECKS
Follow these recommendations in sequence to enhance the performance reliability of
the VR240. This will prevent improper operation and malfunctions.
•
Check input power settings (paragraph 2-7).
•
Plan ahead for the installation of the VR240 in a convenient environment
(paragraph 2-5).
•
Perform the following in sequence upon powerup:
(1) Set the clock (paragraph 2-3.4)
(2) Perform System Configuration (Chapter 3, Section I)
(3) Perform Board Configuration (Chapter 3, Section II)
•
Perform media drive cleaning at the recommended intervals (paragraph 5-
3). Tape drive equipped machines only.
•
After cleaning, reset the clean timer to 0:00 (paragraph 5-3.2)
•
Before installing new media for recording, ensure write protection is not
activated (paragraph 5-20)
•
Know the differences between STOP-SUSPEND, STOP-STOP,
RESUME-RECORD, and RECORD-RECORD. Refer to Section VI of
Chapter 5.