Operator`s manual

Model VR240 Audio Logging Recorder
2-24
January 2000
ITEM CONTROL OR INDICATOR DESCRIPTION
3 Full
Almost Full
Indicates that one of the archive drive media has been
recorded on to capacity.
A yellow light indicates that the media in that drive has
one half hour or less of record time available.
4 Fault A yellow light indicates that an archive drive or internal
hard disk failure may have occurred. It may also indicate
that the “cleaning timers” must be reset.
5 Media Drive Indicator Lights Different tape and disk drives have their own indicator
lights. In most cases, ignore these lights. In general, the
VR240 display provides more and better information.
6 Channel Status Array These LEDs will light as required to report the current
state of each installed channel. They will light under the
following conditions:
Red – indicates that the channel is currently being
recorded
Yellow – indicates the channel is currently being
monitored.
Green – indicates 1. that channel is configured to record
when signal is present but 2. there is currently no signal
present.
No light – indicates that the channel has been disabled
so that it will not record. A yellow light indicates that an
archive drive or internal hard disk failure may have
occurred. It may also indicate that the “cleaning timers”
must be reset.