Operator`s manual

TABLE OF CONTENTS
Chapter Page
1 INTRODUCTION 1-1
Section I. GENERAL INFORMATION 1-1
1-1 INTRODUCTION 1-1
1-2 CONFIGURATIONS 1-1
Section II. EQUIPMENT DESCRIPTION AND DATA 1-3
1-3 PURPOSE AND FEATURES 1-3
1-3.1 Purpose 1-3
1-3.2 Features 1-3
1-4 EQUIPMENT DATA 1-3
1-4.1 Weight and Dimensions 1-3
1-4.2 Power Requirement 1-4
1-5 ACCESSORIES AND OPTIONS 1-4
2
PREPARATION FOR USE AND INSTALLATION 2-1
Section I. FAMILIARIZATION 2-1
2-1 GENERAL 2-1
2-2 INITIAL SETUP 2-1
2-2.1 Telephone Board Connection (Phoenix Connector) 2-1
2-2.2 Auto Board (Amphenol Connector) 2-1
2-2.3 Additional Hardware 2-1
2-3 INITIAL TURN-ON 2-3
2-3.1 Power 2-3
2-3.2 Self Test 2-3
2-3.3 Front Panel Controls 2-3
2-3.4 Setting the System Clock 2-4
2-3.5 Setting Up Input Channel 1 for Recording 2-5
2-3.6 Media Loading and Formatting 2-6
2-3.7 Recording to the Archive Drives 2-9
2-3.8 Adjust the Speaker Volume 2-10
2-3.9 Put the VR240 in Record 2-12
Section II. INSTALLATION 2-14
2-4 INTRODUCTION 2-14
2-5 PLANNING 2-14
2-6 SYSTEM CONNECTION 2-15
2-7 POWER CONNECTION 2-15