Operator`s manual

Model VR240 Audio Logging Recorder
January 2000
3-13
NOTE
Some parameters will not be copied from the archive media.
These are: Unit serial number, PC-Remote ID number, SCSItype
and SCSIterm settings.
a. After pressing the
Config
and
System
soft keys, press the
>
(next) soft key twice. Then
press the
CopyConfig
soft key.
Press the
Continue
soft key and the unit will automatically update its parameters with those on
the archive media.
3-13. SERIAL I/O PORT PARAMETERS.
Serial I/O
brings up a selection of data communication parameters for the RS-232 and RS-485
ports on the back of the unit. These ports are used to connect to printers (including the optional
label printer), PC remote control, master clock systems, and other external control devices.
The VR240 supports two types of printers, an optional label printer, and an optional status
printer. The label printer automatically prints a label that identifies media when it is ejected.
The status printer lists and can depict graphically, activity on the individual channels. Separate
appendices discuss each of these printer options.
Adjust the Serial I/O parameters as follows:
a. After pressing the
Config
,
System
, and
>
(next) soft key twice, press the
SerialI/O
soft
key.
b. Choose parameters as follows:
Cursor
Use the vertical or side-to-side arrow keys to move the cursor through the
Channel number, Bits, Stop, and Parity parameters
CHAN A: 19.2 BITS:8 STOP:2 PARITY:NONE
Cursor Change Save Quit
Overwrite UNIT CONFIG with MEDIA CONFIG
Continue
Cancel