Operator`s manual

Model VR240 Audio Logging Recorder
3-22
January 2000
Stop Timer
gives the time and date at which the current (if recording) or
the next scheduled (if stopped) recording will stop.
Quit
located on the keypad, drops back to the previous menu,
as does simply waiting for timeout.
DispCycle
Shows the cycle selection you have made. If
Once
is displayed, it means
that Auto Rec will be canceled as soon as the stop time has been
reached.
Exit
Drops back to the previous menu, as does simply waiting for timeout.
Press the
>
(next) function key for access to:
MediaInfo
Sampling Rate, Descriptor Titles, Media Position, and Re-write information
is available by pressing the
MediaInfo
soft key.
Lock
You will be prompted to enter your password to lock the unit.
3-22. TRIGGER.
Trigger
allows you to set one channel in such a way that when an action occurs on that channel
(such as a contact closure or voltage drop) it begins to record and also “triggers” selected
channels to record. Set the channels to “be triggered” using the instructions in the “Board
Configuration.”
Set the “trigger” channel by following these instructions:
a. Press the
Config
and then the
>
(next) soft key. Then press the
Trigger
soft key.
b. Use the
Previous
and
Next
soft keys to display the channel desired to be the “trigger”
channel “None” is an option to be selected.
c. Press the
Select
soft key to select the displayed channel and return to the Configuration
menu, or, press the
Cancel
soft key to exit the menu without setting a “trigger” channel.
TRIGGER CHANNEL: None
Previous Next Select Cancel