Operator`s manual

Model VR240 Audio Logging Recorder
3-32
January 2000
a. After pressing the
Config
and the
>
(next) soft key, press the
Board
soft key. Then
press the
>
(next) soft key. Then press the
AudioGain
soft key.
b. Select channels and select audio gain as follows:
To select a channel
press the
Channel
soft key.
To set the audio gain
use the
Decrease
and I
ncrease
soft keys. The gain for each
channel can be set for +24dB to –24dB in 3dB steps. 0dB is the factory default.
Done
– saves the setting that appears on the display and exits you from this screen.
3-30. BEEP.
Beep allows you to enable or disable the sound (made by the VR240’s beep generator) that lets
all parties know a conversation is being recorded. Each channel has its own control.
To configure the beep tone:
a. After pressing the
Config
and the
>
(next) soft key, press the
Board
soft key. Then
press the
>
(next) soft key. Then press the
Beep
soft key.
CONFIGURE BOARD 1: Chan 1-8 (Telephone)
<
AudioGain
Beep OffHook AGC
AUDIO GAIN: Channel 01 : 0dB
Channel Decrease Increase Done
CONFIGURE BOARD 1: Chan 1-8 (Telephone)
< AudioGain
Beep
OffHook AGC >