Operator`s manual

Model VR240 Audio Logging Recorder

3-36

January 2000

b. Press the

Modify

soft key.

Select a channel to modify

using the

–

(minus) and

(plus) soft keys. Hitting these

keys changes the display that shows the channel number and the descriptor currently

valid for that channel. (The factory default for each channel is simply the legend

“Channel #”, where # is the channel in question.)

d. Once you have selected a channel to modify, press the

Edit

soft key.

The following keys appear under the

Edit

menu:

Using the

< – (minus) and + (plus) Cursor >

soft keys, move the display cursor under

the character you wish to modify. The descriptor may be up to 77 characters long.

Arrows on the upper display line indicate that part of the descriptor is to the right (or to

the left) of the visible portion of the display.

Using the

– (minus) and + (plus) Character

soft keys, change the character for the

current cursor position. The characters ascend and descend in an ASCII sequence and it

may take many presses to get the one you want. (The cursor and character keys auto-

repeat. Holding them down will speed up the process quite a bit.) You can select

punctuation and numbers as well as upper and lower case characters. When you first hit

CH 01: Channel 01 >

Channel #

Edit

uit

CONFIGURE DESCRIPTORS:

Modify

CopyFromMedia

Quit

CH 01: Channel 01 >

< <

Cursor

Character