Operator`s manual

Model VR240 Audio Logging Recorder
5-4
January 2000
5-3.1 Clean the DDS drive.
Insert a DDS cleaning cartridge, such as the one supplied with the VR240. Wait for it to pop
out. Then reset the clean timers. That’s it. (The drive recognizes the cleaning tape and will
automatically eject it. Do NOT use an audio grade cleaning tape, which may not be recognized
by the drive.)
IMPORTANT
It is very important to reset the clean timer. Otherwise the VR240
will not know that the drive was cleaned and the
Fault
LED will
come on sooner than the 100 hours of drive operation (because
the clean drive timer was not reset to 0:00).
5-3.2 Reset the cleaning timers.
a. Press the
SysInfo
soft key
b. Press the DriveInfo soft key
Upper: Recording 1521 15:13:54 29Feb1999
< ChangDrv
SysInfo
MediaInf MediaUsage >
SYSTEM INFORMATION:
< Internal
DriveInfo
SysLogs Quit >