Operator`s manual

Model VR240 Audio Logging Recorder
January 2000
5-11
(your selection will be displayed as 1-3, 5). If you disable one of these channels, the remainder
will still be audible.
Select the channel(s) you wish to monitor.
a.
Monitor a single channel as follows:
(1) Press the
Enable
soft key.
(2) Use the keypad to enter the channel number desired.
(3) Press the
Enter
soft key.
(3) Press the
Done
soft key.
b.
Monitor all channels simultaneously as follows:
(1) Press the
Enable
soft key.
(2) Press the
All
soft key.
(3) Press the
Done
soft key. The VR240 will immediately begin playing all active
channels.
c.
Monitor multiple channels as follows:
(1) Press the
Enable
soft key.
(2) Use the keypad and the
Thru
soft key to select the first number of the desired
sequential range of channels to monitor. Then select the second number on the
keypad to complete the desired range.
(3) Press the keypad
Enter
soft key.
(4) Press the
Done
soft key. The VR240 will immediately begin playing the active
channels selected.
d.
Monitor multiple channels which are not sequential as follows:
(1) Press the
Enable
soft key.
(2) Press selected channel on keypad.
(3) Press the
Thru
soft key and the second selected channel on the keypad.
(4) Press the
Enter
soft key.
(5) Repeat steps (1) thru (5) for additional channels to be monitored.
(6) Press the
Done
soft key. The VR240 will immediately begin playing the active
channels selected.
5-7. LEVEL INDICATOR.
When you are in either the
Monitor
menu or in the channel selecting process, the top row of the
Channel Status
LEDs is redefined to be an audio level indicator. LEDs 1 through 6 turn on
green as the signal level progressively increases. LED 7 indicates orange, and LED 8 indicates
red. The input signal level is adjusted optimally when 1 through 7 are on most of the time, and 8
flashes occasionally. When you exit the
Monitor
menu, either through hitting the
Done
soft key
or by waiting for the timeout, the LEDs revert to their normal function of indicating channel
status.