User guide

PitchFactor User Guide The Effects

Quadravox

Quadravox is similar to Diatonic but delivers up to four pitch shifted voices (A, B, C, D) instead

of two. You can select the interval of each voice independently. You can also turn OFF any of

the voices.

NOTE: It’s possible to select OFF for all four voices. If you do, and the Mix knob is set 100%

Wet, there will be no output signal.

Pitch Mix

Controls the ratio of level PitchA+C to PitchB+D. With the knob set full counter-clockwise,

PitchA + PitchC are set to equal level. Full clock-wise, sets PitchB + PitchD to equal levels. The

ratio of level of PitchA to PitchC and of PitchB to PitchD are fixed at equal levels and cannot

be changed.

Pitch A/Pitch B

Selects the harmonic interval (amount of pitch shift) for voices A and B. Turning the control to

the full counterclockwise position will turn OFF the corresponding voice.

Delay A

NOTE: QUADRAVOX’s delay controls work differently from those in the other effects.

Quadravox’s four delays are not independently variable. Instead, they are staggered with A

having the shortest delay, B longer than A, C longer than B and D the longest. The Delay A

control is used to set the last delay, D.

With Tempo OFF, delay is displayed in mSec. With Tempo ON, delay can be sync’d to the

tempo and is displayed as a rhythmic sub-division of the tempo beat value.

Delay B

The Delay B control is used to select the grouping of the four delays (A, B, C, D). The delays

can be evenly spaced or spread out as represented by the graphical display. When the delays

grouping is such that there is no space between the letters, all four delays are set to the same

length.

Key/Depth

Selects the key.

Scale/Speed

Selects the scale.

Xnob

Controls the amount of pitch shift for voice C. Turn the control full counterclockwise to turn

voice C OFF.

Ynob

Controls the amount of pitch shift for voice D. Turn the control full counterclockwise to turn

voice D OFF.