User guide

PitchFactor User Guide The Effects

Delay A/B

Selects the rhythm/groove sequence for A/B. The rhythm sequences are a set of 21 selectable

presets. The level of the signal at each step is graphically represented by the number of LEDs

lit in each column.

Turn the control full counterclockwise [Grv OFF] to turn off the rhythm sequence, full

clockwise to select a random sequence.

The pitch sequences are numbered from [01] to [20] and [RANDM] for the random rhythm.

With the rhythm sequence turned OFF, all sixteen steps of the sequence are played at full

amplitude.

Key/Depth

Sets attack and release time for the dynamics of the Rhythm and Effects. At full

counterclockwise the audio takes the entire step length to fade in, at 12 o’clock the audio is

present for the entire step duration, and at full clockwise the audio is present for only 1/10

of the step’s duration.

Note: This control has no effect when both Rhythm and Effect knobs are set to OFF.

Scale/Speed

With Tempo OFF, sets the length of each of the 16 steps in mSec. With Tempo ON, sets the

length of each step relative to the tap tempo (length of note e.g. whole, quarter, etc.).

Xnob/Ynob

HarPeggiator lets you apply a sequence of filter, fuzz and/or glitch effects to each note of the

16-step sequence. Xnob/Ynob selects the effect sequence for A/B [FXA]/[FXB].

The effect sequences are a set of 25 selectable presets.

The effects are indicated by effect type - [FLT]=FILTER, [FZ]=FUZZ, and [GLT]=Glitch. [ALL]

indicates that the preset uses all three effect types.

There are five filter effects, five fuzz effects and five glitch effects to choose from. Or, you can

select one of four different types of random effect sequences – [RnFL]=random filters,

[RnfZ]=random fuzz, [RnGl]=random glitches and [RnM]=random combination of filters,

fuzz and glitches].

Turn the control full counterclockwise [FX :OFF] to turn Off effects for all steps in the

sequence.