User guide

PitchFactor User Guide The Footswitches
36
Synthonizer
Shifts both voices up one octave.
Tap Footswitch
The “Tap” footswitch is used to tap tempo if Tempo is ON. While tapping with Tempo ON,
the updated tempo value is displayed by the Billboard in BPM. While tapping with Tempo
OFF, the updated value is displayed in mSec.
To turn Tempo ON or OFF, press the Encoder. When Tempo’s state changes, the Billboard will
briefly display the appropriate message either “TMP ON” or “TMP OFF.” When Tempo is ON,
the Tempo LED flashes at the current tempo.
Tuner
The Tuner is accessed by pressing the Middle and Right Footswitches simultaneously. Press
any footswitch to exit the Tuner and return to normal operation.
Bank Mode
In Bank Mode, the Billboard displays the Bank and Preset Number of the currently running
Preset. The Left and Middle Footswitches are used to instantly select or Bypass either Preset 1
or Preset 2. Presets are stored in pairs and each pair of Presets is called a Bank. There are a
maximum of 50 Banks - a total of 100 Presets.
The Billboard displays the current Bank and Preset number. Banks are numbered from 1 to 50
and Presets are numbered 1 and 2.
Note: The 100 Presets can be based on any of the Effects. You can choose to have all 100
presets based on Diatonic. Or, two based on Diatonic, three based on MicroPitch, five based
on Crystals, etc. - or any combination.
Loading Presets
The Preset numbers correspond to the Left and Middle Footswitches.
To Bypass the Preset, simply press the Footswitch corresponding to the loaded Preset. Press
again and the Preset becomes active.