User guide

PitchFactor User Guide System Mode
43
System Menu Tree
The system mode is divided into four categories [BYPASS], [TUNER], [AUX SW], [MIDI],
[GLOBAL], and [UTILITY] which are the top-level menu items that appear when entering
system mode.
In the following, factory default settings are indicated in (bold)
[BYPASS] – Select Bypass Mode
After entering System Mode, turn the Encoder to select [BYPASS], then press the Encoder to
enter Select Bypass Mode. Turn the Encoder to select either [BYP TYP] or [KILLDRY].
[BYP TYP] – Choose Bypass Type (DSP, RELAY, DSP+FX)
Press the Encoder to select. Turn Encoder to select DSP, Relay or DSP+FX.
When [DSP] is selected, Bypass sends the audio at the DSP’s inputs directly to the
outputs without any effects processing.
When [RELAY] is selected, Bypass employs a pair of relays to “hardwire” the inputs
to the outputs, giving a “true bypass.”
When [DSP+FX] is selected, Bypass sends the audio at the DSP’s inputs directly to
the outputs with the decaying ‘tail’ of the current effect mixed in.
Press the Middle Footswitch once to back-up one level to BYPASS menu.
Press the Middle Footswitch twice to go to top level System menu.
[KILLDRY] – Kill Dry Audio (NO, YES)
Press the Encoder to select. Turn Encoder to enable/disable KILLDRY.
When KILLDRY is enabled (YES), the dry signal is removed from the output and
PitchFactor only outputs a 100% wet Level. For some of the effects the Intensity
control acts as a Wet/Dry Mix control. For these effects, if KILLDRY is YES, the
Intensity control is disabled.
Press the Middle Footswitch once to back-up one level to BYPASS menu.
Press the Middle Footswitch twice to go to top level System menu.
[TUNER] – Tuner Settings
Press the Encoder to select. Turn the Encoder to select either [AUDIO] or [CALIBRT].
[AUDIO] – Choose audio function when Tuner is active (BYPASS, MUTE)
Press the Encoder to select. Turn the Encoder to choose BYPASS or MUTE. When
BYPASS is selected, whenever PitchFactor’s tuner is enabled, the audio input is
connected to audio out. When MUTE is selected, audio is muted when tuning.
Press the Middle Footswitch once to back-up one level to TUNER menu.
Press the Middle Footswitch twice to go to top level System menu.