User's Manual

ManualsBrandsEver Win International ManualsAudio EquipmentBluetooth Headset

SAFETY INFORMATION

Please read this information before you use the head-

set.

Electronic Devices

To avoid electromagnetic interference, please turn of the

headset in any place where posted notice instruct you to

do so.

Aircraft

Turn off the headset when on board an aircraft. The use

of this headset might interfere with the electrical system of

an air craft.

Medical Instrument

If you use a medical device, such as a pacemaker, consult

the manufacturer of your medical device to determine if it

is adequately shielded from electromagnetic interference.

Your physician can assist you in obtaining this information.

Power Adapter

Only use the supplied power adapter with the headset.

Using a power adapter other than the manufacturer’s

approved power adapter will void the warranty.

Storage

You are advised to put the headset in a safe place where it

will not be bent or crushed when not in use otherwise it

may bring harm to the human body.

Summary of content (14 pages)

PAGE 1
SAFETY INFORMATION Please read this information before you use the headset. Electronic Devices To avoid electromagnetic interference, please turn of the headset in any place where posted notice instruct you to do so. Aircraft Turn off the headset when on board an aircraft. The use of this headset might interfere with the electrical system of an air craft.
PAGE 2
SAFETY INFORMATION Please read this information before you use the headset. Children Keep the headset away from children. Some small or detachable parts might be swallowed and result in harm. Repair or Service Any attempt to modify or remove any part of the headset will void the warranty. NOTE: Most modern electronic devices are susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
PAGE 3
SLX-810 GENERAL DESCRIPTION SLX-810 is a Bluetooth wireless hands-free headset which complies with the Bluetooth V2.0+EDR specifications and supports the Headset Profile and Hands-free Profile.
PAGE 4
CHARGING THE BUILT-IN BATTERY SLX-810 has a built-in battery, which must be charged fully before using the headset. Charging takes about 2.0 hours. You can charge the headset through the power adapter. INSTRUCTIONS FOR USING SLX-810 In this guide, a “short press” refers to a time period of less than 2 sec during which a function button is being pressed. “Long press” refers to a time period of more than 2 sec, but less than 4 sec during which a function button is pressed.
PAGE 5
3. Scroll to the Bluetooth menu on your phone and search for active Bluetooth devices (refer to your phone’s user manual for additional details). 4. Once the search is complete, a list of devices will be displayed. 5. Select SLX-810. When prompted, input the default PIN (0000). When successfully paired, the blue LED will flash 3 times.
PAGE 6
HEADSET FUNCTIONS AT-A-GLANCE Function Phone Status SLX-810 Status Power Off - Off Action ◦ ◦ Retract the Slider. Red LED will shine solid for 2 seconds + 2 tones will sound on speaker. Voice Dial On On (Idle) ◦ Short press the MFB Redial Last Call On On (Idle) ◦ Long press the MFB Receive a Call On (Phone Ring) On (Ring) ◦ ◦ Short press the MFB A single tone will sound on the speaker. Reject a Call On (Phone Ring) On (Ring) ◦ Long press MFB.
PAGE 7
HEADSET FUNCTIONS AT-A-GLANCE Phone Status SLX-810 Status Switch between active calls On (In calls, 2 Active Calls) On (In Call) ◦ Hold MFB for 4 seconds will switch between calls. Transfer audio between headset and phone On (In Call) On (In Call) ◦ Hold MFB for 6 sec will transfer audio from headset to phone. Volume Up - On ◦ Short press volume (+) button. When max volume reached, 2 beeps will sound on speaker.
PAGE 8
LED STATUS Headset State LED Color Status Power On Blue LED shines solid for 2 sec Power Off Red LED shines solid for 2 sec Pairing Mode Blue/Red LED flashes Pair Success Blue LED flashes 3 times Standby Mode Blue LED flashes every 5 sec Connected Mode Blue LED flashes every 5 sec Ringing Blue/Red LED flash together every 1 sec Ongoing Call Blue LED flashes every 2 sec Charging Mode Red LED shines solid at all times Missed Call Blue/Red LED flashes 5 times every 5 sec Battery Low Red
PAGE 9
PAGE 10
FCC RF RADIATION EXPOSURE STATEMENT Canada and USA Regulatory Information Operation is subject to the following two conditions: 1.This device may not cause interference and 2.This device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
PAGE 11
This page is left blank intentionally.
PAGE 12
This page is left blank intentionally.
PAGE 13
15
PAGE 14
Ever Win International Corp. 17579 Railroad Street, City of Industry, CA 91748 www.everwin.