Use and Care Manual

Referring to horizontal installationWXEVXETTP]MRKXLIǻPPIVQIXEPEXXLIFSXXSQSJXLINSMRXXLIRYT[EVH']WXEVXMRKEX
XLIPS[IWXTSWMXMSREHEQ[MPPFIGVIEXIH[MXLMRXLINSMRXXSVIHYGIVYRSǺSJǻPPIVQEXIVMEPXLVSYKLSYXW[IEXTVSGIWW
Assure brazing material is applied to full perimeter of joint.
7ITIEXXLMWWEQITVSGIWWJSVSXLIVIRH'IJSVIXLMWWXITWPMKLXP]QSZIXLILERHPIGPIEVSJǼEQIEVIEXSEZSMHLIEXMRK
of vinyl grip, but do not completely close valve; 45° angle is perfect. It’s also acceptable to keep the valve in this
position for the entire soldering process, if it doesn’t create any inconvenience on handling the valve.
YES
NO
45°
For installations in vertical position, make a similar sequence.
&XXLIIRHSJXLITVSGIWWMXMWRIGIWWEV]XSEPPS[ZEPZIXSGSSPREXYVEPP] ERHRSXYWI[EXIVSVSXLIVǼYMHXSI\TIHMXI
cooling.
Always test joint for proper seal prior to service.
OPERATION
For operation, move the handle, accordingly to arrows on the lever handle, to position for the intended open or
closed function. The valve handle is marked showing proper rotation direction for “ON” and “OFF” positions. Standard
rotation is clockwise for “OFF” (closed) and counterclockwise for “ON” (open).
MAINTENANCE
.R GPSWMRK MX MW FIRIǻGMEP XS YRHIVWXERH XLEX]SY LEZI RS[ MRWXEPPIH EZEPZI HIWMKRIH[MXL HSYFPI 47MRK WXIQ
technology. This design provides maintenance free operation and will not require periodic adjustments typical of
packing gland ball valves.
ŀInstallation video available at the following link: https://www.youtube.com/watch?v=84saeVzI-mQ
q This document provides only general indications. The items included herewith may change at any time, without notice and for technical or commercial reasons.
The information included in this technical sheet do not exempt the user from strictly complying with the rules and good practice standards in force.