Specification

30
INTERIOR WOOD
APPLICATIONS
 3/8”, 1/2”, and 5/8” single-layer gypsum board to wood studs and joists
 1/2” and 5/8” double-layer gypsum board to wood studs and joists
 Insulation to wood
 OSB or plywood to wood
 Wood to wood applications
SPECIFICATIONS
 Gauge – #6 to #10
 Lengths – 1” to 4”
 Head Type – Bugle
 Recess Type – #2 Phillips
 Thread Type – Single Lead
 Finish – Gray Phosphate. Also available in Yellow Zinc and
GRABBERGARD
®
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICCES ER-5280.
PRODUCT FEATURES
 Superior holding power and ease of penetration
 A coarse thread screw for general interior applications
 8 threads per inch
 Extra sharp, single lead 23° GRABBER point, designed to penetrate quickly
and easily
#2 Phillips recess drive
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum
and 2500 RPM.
 The Bugle head is fully seated when the head is flush with the work surface.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
 For wood to wood connections, minimum penetration should be 7 diameters
(e.g. 1-1/4” for #8 fastener)
Product #230I
Bugle Head GRABBER
®
- Interior (1 OF 3)
Attaches gypsum board to wood. Extra sharp point and threads make driving
easier and provide better holding power.
Finish - Black/Gray Phosphate, Yellow Zinc and Clear Zinc
Bugle
Head