Specification

90
Product #240S
Scavenger
®
Head DRIVALL
®
Self Drilling (1 OF 3)
APPLICATIONS
 Gypsum board to 20-12 gauge steel studs and track
 Insulation to steel, 20-12 gauge
SPECIFICATIONS
 Gauge – #6 to #8
 Lengths – 1” to 3”
 Head Type – SCAVENGER
®
 Recess Type – #2 Phillips
 Thread Type – Single Lead
 Finish – Gray Phosphate and Clear Zinc GRABBER
®
screws are
manufactured in an ISO 9002 and ISO 14001 certified and approved factory,
and are approved by ICCES report ER-5280.
PRODUCT FEATURES
 Self tapping drill point is designed for penetration into 20-12 gauge steel
 #2 Phillips recess drive
 Scavenger
®
head will seat fast and easily and create a flush surface finish
 Unique head configuration helps eliminate paper burrs and aids proper
seating of fasteners
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum and
RPM range of 0 to 2,500.
 The Scavenger head is fully seated when the head is flush with the
work surface.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
 The fastener must penetrate beyond the metal a minimum of three
thread pitches.
Attaches gypsum, insulation board, wood, etc. to metal studs 20-12 ga. Unique Scavenger®
head helps reduce paper burrs.
Finish - Black/Gray Phosphate, Clear
Heavy Gauge Metal (20ga or thicker)
®