Installation Guide

Disposer Light
Use Instructions
IN-DL-EB-201
Call us toll-free at 1-833-240-6222 for assistance.
M-F 8:00am-5:00pm PST English & Spanish
This disposal light provides illumination in the undersink cabinet
when the cabinet door is opened.
This LED motion sensor lamp uses PIR human body infrared sensing
technology, which is safe, efficient, energy-saving, long-life, and
non-radiative. It is designed specifically for food waste disposers.
When the cabinet door is opened, the lamp will automatically turn on.
The lamp will automatically turn off 20 seconds after closing the door.
Placing the plate in another part of the cabinet is placement
alternative as long as the sensor faces the cabinet doors.
LED Motion Sensor Lamp Installation Instruction
1: Twist and open the cover
in the direction of arrow
2: Install 3 AAA batteries 3: Twist and close the cover
in direction of arrow
4: Tear off the protective
sheet on the 3M sticker
5: Attach the black metal plate
to the bottom of food waste
disposer. The hole positions on
the plate should align with the
hole positions on the food
waste disposer.
6. Position the motion
sensor so it faces the
cabinet doors
Induction Method: Motion Sensing
Sensing Distance: > 2 Meters
Induction Angle: 120 Degree
Power: 3 AAA Batteries
FCC N” : DEF18070073.01
When the cabinet door is opened, the lamp will
automatically turn on. The lamp will automatically turn off
20 seconds after closing the door.