Installation Guide

• Use isopropyl alcohol to
remove any old adhesive
remaining on surfaces.
• Use sandpaper to smooth
rough or dirty surfaces.
• Remove sawdust or other
debris and allow surface
to dry completely before
applying felt pads.
• Peel and stick.
• Repeat until all legs are
prepped and pads placed
in position.
Surface Prep is Key
All surfaces should be clean and smooth.....
TIPS
for a stronger bond
• Applying pressure to felt pad will help form a stronger bond.
• Sitting on a
chair is an easy
way to apply
pressure.
• Allowing extra
set-up time under
pressure will further
enhance the bond.
HEAVY-DUTY
Heavy Duty felt pads are designed to
provide unmatched protection to furniture
and hard floor surfaces.
WARNING
NEVER
USE ACETONE