Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Installation
1
Pre-drilling the installation holes
□ Use a pencil and ruler to measure and mark the installation
locations as this diagram shows.
□ Then use a 1-3/8 in. (35 mm) boring bit to drill the door hole
7/8 in. from the edge. Ensure the door hole is a minimum of
1/2 in. (12.8 mm) deep. Do not drill through the door face.
1-3/8 in. (35 mm)
2
Installing the hinges to the door
□ Insert each hinge (A) into the pre-drilled hole in the door
and secure using two screws (D) for each hinge (A).
A
D
Diagram for Drilling Hinge Cup
ø
1-3/8 in.
(35 mm)
X
7/8 in.
(21.5 mm)
1/2 in
(13 mm)
Deep
3a
Installing the mounting plates to the
cabinet
□ Align the mounting plates (B or C) and fasten with two screw (E)
- See installation diagram on next page.
B
E
C
E
7/8 in.
(21.5 mm)
Door Thickness
Frameless Face Frame
Edge of Door