Instructions / Assembly

ManualsBrandsEverbilt ManualsCabinet HardwareWide Angle 1 3/8 in. Overlay 165 Frameless Hinge (2-Pack)

THANK YOU

We appreciate the trust and conﬁdence you have placed in Everbilt through the purchase

of this hinge. We strive to continually create quality products designed to

enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Everbilt!

USE AND CARE GUIDE

WIDE-ANGLE HINGE

Questions, problems, missing parts? Before returning to the store,

call Everbilt Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-800-305-1726

HOMEDEPOT.COM

Item # 1002 782 607

Model # 9235927

924393800

Summary of content (8 pages)

PAGE 1
Item # 1002 782 607 Model # 9235927 USE AND CARE GUIDE WIDE-ANGLE HINGE 1-800-305-1726 HOMEDEPOT.COM THANK YOU We appreciate the trust and conﬁdence you have placed in Everbilt through the purchase of this hinge. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
PAGE 2
Safety Information Please read and understand this manual before installing this product. CAUTION: Always be cautious when using power tools. Warranty Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product or, at the Manufacturer’s option, refund the purchase price.
PAGE 3
Pre-Installation PLANNING INSTALLATION Ensure all parts listed in the Package Contents section are included and that you have the listed Tools Required on hand. If any part is missing or damaged, contact customer service. When planning your installation, ensure the hinge is oriented in its ﬁnal position as shown: OR DO SID EP AN EL These hinges can be installed in frameless and face frame cabinetry. Ensure that you choose the correct mounting plate in the Package Contents for your task.
PAGE 4
Pre-Installation TOOLS REQUIRED #2 Screwdriver Pencil or Scribe Drill 1/6 in. Drill bit PACKAGE CONTENTS Ruler (in. and mm) 35 mm boring bit (Forstner bit) B A D C Part Description Quantity A Wide Angle Hinge B Frameless Mounting Plate 2 2 C Face Frame Mounting Plate 2 D #8 x 5/8 in.
PAGE 5
Pre-Installation RECOMMENDED NUMBER OF HINGES PER DOOR SIZE Use this diagram to determine how many hinges you will need for your door. If you are hanging a door with a mirror or a door that is wide, you will need additional hinges. 5x 4x 80 in. 56 in. 36 in. 2x 92 in. 3x 9 – 13 lbs 14 – 26 lbs 27 – 37 lbs 38 – 50 lbs SPECIFICATIONS Door thickness should be 3/4 in. (19 mm) or 1 in. (25 mm).
PAGE 6
Installation 1 Pre-drilling the installation holes □ Use a pencil and tape measure to measure and mark the installation locations as this diagram shows. □ Then use a 1/16 in. drill bit to drill the cabinet holes and a 35 mm boring bit to drill the door hole. Ensure the door hole is no deeper than 15/35 in. (12 mm). Do not drill through the either the door face or the cabinet. 1-3/8 in. (35 mm) Door 3/16 in. (5 mm) ø1-3/8 in. (35 mm) 3/16 in. (5 mm) 1-1/4 in. (32 mm) 1-1/4 in. (32 mm) A 7/8 in.
PAGE 7
Installation the mounting the door to 3 Installing 4 Installing plates the cabinet □ Align the mounting plates (B or C) to the pre-drilled holes and fasten to the cabinet using two screws (D) per mounting plate (B or C). □ Open the hinges (A) to the fully-extended position. □ Connect the hinge arms (A) to the mounting plates (B or C) and press the hinge arms (A) down until they snap to the plates (B or C).
PAGE 8
Installation 5 Adjusting the door □ Height Adjustment: Loosen the top mounting screw (1) to adjust the door up or down. 1 □ Overlay Adjustment: Turn the adjustment screw (2) to adjust the door overlay. 2 □ Depth Adjustment: Turn the eccentric screw (3) to adjust the distance of the doors from the cabinet.