Installation Guide

6
Installation (continued)
3
Installing the mounting plates to the
cabinet
□ Align the mounting plates (B) to the pre-drilled holes and
fasten with two screws (C) for each mounting plate (B).
B
C
4
Installing the door to the cabinet
□ Open the hinges (A) to the fully-extended position.
□ Slide each hinge arm (A) to the mounting plates (B) and
tighten the screw (1) on each plate (B) to secure in place.
B
A
1
5
Adjusting the door
□ Height Adjustment: Loosen the top mounting screw (1) to
adjust the door up or down.
1
□ Overlay Adjustment: Turn the adjustment screw (2) to adjust
the door overlay.
2
□ Depth Adjustment: Turn the eccentric screw (3) to adjust
the distance of the doors from the cabinet.
3