Instructions / Assembly

ManualsBrandsEverbilt ManualsCabinet Hardware20 in. Full Extension Push to Open Drawer Slide Set

THANK YOU

Thank you for choosing Everbilt!

USE AND CARE GUIDE

PUSH TO OPEN BALL BEARING DRAWER SLIDES

Questions, problems, missing parts? Before returning to the store,

call Everbilt Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-800-305-1726

HOMEDEPOT.COM

Retain this manual for future use.

Item #

Model #

1002 782 611

9236046 (20 in.)

9236048 (22 in.)

1002 803 079

924 394 600

Summary of content (6 pages)

PAGE 1
Item # 1002 782 611 1002 803 079 Model # 9236046 (20 in.) 9236048 (22 in.) USE AND CARE GUIDE PUSH TO OPEN BALL BEARING DRAWER SLIDES Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 HOMEDEPOT.COM THANK YOU Thank you for choosing Everbilt! 924 394 600 Retain this manual for future use.
PAGE 2
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . .
PAGE 3
Pre-Installation (continued) PACKAGE CONTENTS A Part B Description C Quantity A Bracket 2 B Drawer Slide 2 C #6x1/2 in. Screw 8 Installation Options These slides are intended for frameless cabinets. For face frame cabinets, the socket set is required. Frameless Face Frame 3 HOMEDEPOT.COM Please contact 1-800-305-1726 for further assistance.
PAGE 4
Dimensions Please review these diagrams and measure and mark your installation location before you begin the installation procedures. Ƒ To avoid binding, the drawer or pull-out-shelf must be 1/2 in. (12.7 mm) narrower than the cabinet opening on each side. Ƒ The top and bottom of the drawer or pull-out-shelf bottom should have a 1/8 in. (3.2 mm) minimum clearance from the cabinet opening. Ƒ These slides have a capacity of 77 lb (35 kg), per pair. Ƒ These slides are available in lengths of 20 in.
PAGE 5
Installation 1 2 Separating the slides Press the release lever (1) and remove the drawer slides (B) from each bracket (A). Marking the slide locations on the drawer Mark 1-1/4 in. (32 mm) from the bottom of the drawer. Align the top of the drawer slides (B) with the marks on each side of the drawer. A B 1-1/4" (31.8mm) B 1 3 4 Installing the drawer slides Ensure each drawer slide (B) is level and then secure to the sides of the drawer with screws (C).
PAGE 6
Installation (continued) 5 Marking the bracket positions Mark “X” from the bottom of the mark. Align the top of the bracket (A) with the mark, 1/16 in. from the front of the cabinet. A X 6 Installing the brackets into the cabinet and drawers Make sure each bracket (A) is level and secure inside the cabinet with screws (C). Insert the drawer into the cabinet and close. The release lever (1) will lock. 1/16" (1.