Instructions / Assembly

Installation
1
Pre-drilling the installation holes
□ Use a pencil and tape measure to measure and mark the installation locations
as this diagram shows.
□ Then use a 1/16 in. drill bit to drill the cabinet holes and a 35 mm boring bit to drill
the door hole. Ensure the door hole is no deeper than 15/35 in. (12 mm).
Do not drill through the either the door face or the cabinet.
2
Installing the hinges
to the door
□ Insert each hinge (A) into the pre-drilled
holes in the door and secure using
two screws (C) for each hinge (A).
A
C
1-3/8 in.
(35 mm)
Door
3/16 in. (5 mm)
1-17/16 in.
(37 mm)
1-1/4 in.
(32 mm)
3/16 in. (5 mm)
7/8 in.
(21.5 mm)
A
B C
ø1-3/8 in.
(35 mm)
1-1/4 in.
(32 mm)