Instructions / Assembly

STEP 1:

For new or remodel installations where

the counter top has already been placed,

bend the end tabs of the dishwasher

bracket into a 90 degree angle as shown,

with the raised panels facing up.

STEP 2:

Apply silicone or rubberized adhesive

caulk to the three raised panels on the

bracket as shown. This provides shock

absorption to withstand the daily use

of the dishwasher door.

STEP 3:

Put the bracket into place under the

counter top with the tabs ﬂush to the

cabinet facing. Press bracket up against

the counter top – the bracket design

will conceal any caulk squeeze out.

STEP 4:

Attach bracket to the cabinet sides with

(4) #6X1/2” wood screws (provided).

Caulk edges to provide a ﬁnished seal.

STEP 5:

Attach the dishwasher straps to the

dishwasher bracket using one of the

many attachment holes. This will result

in a secure and professional

ﬁnished installation.

INSTALLATION AFTER PLACEMENT OF COUNTER TOP

PAGE 1
INSTALLATION AFTER PLACEMENT OF COUNTER TOP STEP 1: For new or remodel installations where the counter top has already been placed, bend the end tabs of the dishwasher bracket into a 90 degree angle as shown, with the raised panels facing up. STEP 2: Apply silicone or rubberized adhesive caulk to the three raised panels on the bracket as shown. This provides shock absorption to withstand the daily use of the dishwasher door.
PAGE 2
INSTALLATION BEFORE PLACEMENT OF COUNTER TOP STEP 1: Place the dishwasher bracket across the dishwasher opening on top of the cabinets with the raised panels facing up and the tabs ﬂush to the cabinet facing. Secure the bracket with (4) #6X1/2” wood screws (provided). These are the same size screws used to anchor hinges to delicate cabinet doors. STEP 2: Apply silicone or rubberized adhesive caulk to the three raised panels on the bracket as shown – the bracket design will conceal any caulk squeeze out.