Instructions / Assembly

Installation
1
ASSEMBLING THE
ALUMINUM PIPE
□ Press the sides of the aluminum pipe
together and lock them into place.
2
ATTACHING THE VENT CAP TO
THE PIPE
□ Attach the vent cap to the pipe.
Ensure the pipe ts snug inside the
collar. Align the clips on the collar (A)
so they snap into the pipe slots (B).
A B
3
CUTTING A HOLE THROUGH
THE WALL
□ Cut a hole through the wall ¼ in.
diameter larger than the pipe. For
example, to accommodate a 4 in.
pipe cut a hole 4 ¼ in. in diameter.
NOTICE: Ensure the appropriate tool is used to
cut the hole in the wall according to the type of wall
material.
4 ¼ in
10.8 cm
4 in
10.2 cm
4
INSTALLING THE EXHAUST HOOD
□ From the outside, pass the pipe through the hole opening
until the vent cap lies ush against the outside wall surface.
5
SECURING THE VENT CAP
□ Secure the vent cap to the wall by screwing it into place and/
or caulking around the reveal.
Safety Information
IMPORTANT: Vent the exhaust hood outdoors through a wall or window opening as close as possible to the dryer.
Warranty
WHAT IS COVERED
All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and
performance failure on items. The manufacturer will replace or repair at their option.
WHAT IS NOT COVERED
This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure or defect arising from the misuse,
abuse, neglect or modication of the product. Any damage or malfunction inicted upon the product by the user or other external sources, or any failure to
comply with the warnings and instructions is not covered.
For further assistance visit www.HomeDepot.com.
TOOLS REqUIRED
Phillips screw driver Caulking gun
HARDWARE REqUIRED (NOT INCLUDED)
Screws (4) Latex caulking
Use and Care Guide
Exhaust Hood With Guard
Item # 592-631
Model # BPGH4WHD6
HOMEDEPOT.COM