Warranty

8
Care and Cleaning
WARNING: Ensure the pump is disconnected from the
power source before attempting to service or remove any
component.
WARNING: Do not remove the impeller. Removal of the
impeller requires special tools and can only be performed
by an authorized service center.
To clear a pump that is clogged with debris:
Ƒ Unplug the pump to disconnect the electrical power.
Ƒ Unscrew the six screws (1) on the pump body and take
the rubber belt (4) down from the volute (2).
Ƒ Remove the volute (2).
Ƒ Remove debris from around the impeller (3).
Ƒ Reassemble the pump.
ADDITIONAL MAINTENANCE GUIDELINES
Ƒ This unit is permanently lubricated. Oiling is not required.
Do not, in any case, open the sealed portion of the unit or
remove the housing screws.
Ƒ Periodic cleaning of the pump parts will prolong the LIFE
and EFFICIENCY of the pump. Refer to the assembly and
disassembly of the pumping head.
Ƒ Ensure the power cord is in good condition and contains
no nicks or cuts.
1
2
3
4