Use and Care Manual
Table Of Contents
- APPLICATION
- TOOLS REQUIRED
- MATERIALS REQUIRED (NOT INCLUDED)
- PACKAGE CONTENTS
- SPECIFICATIONS
- SHALLOW WELL JET PUMP INSTALLATIONS
- REPLACING AN OLD PUMP
- WELL POINT (DRIVEN POINT) INSTALLATION
- CASED WELL INSTALLATION, 2 IN. ORLARGER CASING
- INSTALLATION FOR SURFACE WATER
- PRE-CHARGE TANK CONNECTION
- STANDARD TANK CONNECTION
- CONTENIDO DEL PAQUETE
- INSTALACIÓN DE BOMBAS DE CHORRO EN POZOS POCO PROFUNDOS:
- REEMPLAZO DE UNA BOMBA VIEJA
- INSTALACION DEL PUNTO DEL POZO(PUNTO DE HINCAR)
- INSTALACION DE POZO RECUBIERTO CON UN RECUBRIMIENTO DE 2" OMAS
- CONEXIÓN PARA TANQUEPRE-CARGADO
- ajuste de la tensión
11 HOMEDEPOT.COM
Please contact 1-844-241-5521 for further assistance.
Discharge Pipe and Pressure Tank Connections (continued)
STANDARD TANK CONNECTION
Install a tee in the pump discharge port.
Run a pipe from the pump discharge port to the inlet port of your tank. The pipe size must be at least as large as the discharge port.
Install a tee with reducing bushings in the suction pipe as shown.
Install a barbed fitting in the smallest bushing(1/8" NPT).
Run the AVC tubing from the barbed fitting on the suction pipe tee to the port in the AVC mounted on the tank. See the instructions
provided with the tank and the AVC for details. The AVC port location may vary.
Congratulations! You have just completed the tank connection for your jet pump.