Installation Guide

HOMEDEPOT.com
Please contact 1-800-305-1726 for further assistance.
Setting Up the Canopy
1
OPENING THE CANOPY FRAME
With a person on each end, lift and
partially pull the canopy frame (B)
apart.
B
2
ATTACHING THE CANOPY
Unfold the canopy (A) and place on
top of the canopy frame (B).
Secure the canopy (A) to the corners
of the frame (B) by attaching the
velcro tabs on the inside of the
canopy (A) corners to the velcro tabs
on the corners of the frame (B).
A
B
3
LOCKING THE FRAME
From each corner of the canopy
frame, lift the slider up until it clicks
into the spring button.
4
ADJUSTING THE CANOPY HEIGHT
Push the push button and then pull down on each canopy leg
to extend the canopy to your desired height.
5
SECURING THE CANOPY IN PLACE
Insert a stake (C) into the foot of each canopy leg.
Measure out from the each leg to a proper distance and
secure four stakes (C) to the ground. Tie the pre-attached
ropes to the stakes (C) on the ground. Ensure the rope has
the proper tension by adjusting the plastic adjusters on the
ropes.
C
Use and Care Guide
8 ft. x 8 ft. Pop-Up Canopy
Item #1002658103
Model #NS OPP G64-B
PACKAGE CONTENTS
A - Canopy x1 B - Canopy frame x1 C - Stake x8 D - Hex wrench
(for maintenance only) x1
E - Wheeled storage bag x1

Summary of content (3 pages)