Product Brochure

Pedestal Pump (Pump pictured is typical)
Read your manual for installation, operation, and safety information.
This guide neither supplements nor replaces the Owner’s Manual.
Quick Start Guide
For Professional Technical Support call 1-844-241-5521
Rev. 7/20/21
3. Ensure Pit/Basin is clear of all debris. Lower the pump
into the center of the sump pit or sump basin.
Pit/Basin should be at least 12” diameter and 18”
deep.
4. Plug into a GFCI protected outlet.
5. Check the pump’s operation by lling the sump
pit or basin with water.
NOTE: The Float Switch comes pre-assembled. Refer to your owner’s manual if you need to adjust the ON and OFF position of the oat switch.
1. Attach discharge pipe to the pump discharge.
Drill a 1/8” anti-airlock hole as shown.
2. Connect a check valve to the discharge pipe.
Be sure the ow is away from the pump.
Discharge Pipe
1/8” Anti-airlock hole
Check Valve
Minimum
18” Deep
Minimum
12” Dia.
GFCI Outlet
Discharge size:
SKU# 1004162175: 1-1/2 in. FNPT
or 1-1/4 in. FNPT (with adaptor)
SKU# 1004162140: 1-1/4 in. FNPT