Installation Guide

4 For Professional Technical Support call 1-844-241-5521
Pre-Installation(continued)
Other necessary parts and tools may require:
• 2 in. PVC Close Nipple
• 2 in. 90° PVC Elbow
• 2 in. Slip Union
• 2 in. Slip x 3 in. NPT Reducer Bushing
• Vent Pipe (see Step 14, Page 6)
• 5/16 in. Nut driver
• 7/16 in. and 1/2 in. Wrenches
• Carpenter’s Level
• Center Punch
• Cloths, Rags
• 4 in. Expandable Plumber’s Plug
• Hammer
• Hole Saw (3 in.)
• Marker
• Sponge
• Strap Wrench
• Wallboard Knife
Follow the upflush system installation instructions and all applicable national or local electrical and plumbing codes for a good installation.
Thorough planning is a must. Get the right tools for the job before beginning, and make a specific and thorough plan. Many localities will
require you to make drawings, obtain a building permit and/or have your work inspected. Be prepared; read all instructions that come with
this product before installation.
Retain this owner’s manual for future reference.
See Figure 1 for the basic plumbing layout.
Figure 1: Piping Components and Layout
Safety goggles
Thread Tape