Installation Guide

10 For Professional Technical Support call 1-844-241-5521

Troubleshooting

Troubleshooting information is for the pump only.

WARNING: Risk of electrical shock. Always unplug the pump before handling it or making any adjustments. Always wear rubber boots

when there is water on the floor and you must unplug the pump or make any adjustments.

WARNING: Risk of infections from pathogens in pumped effluent. Wear rubber gloves when removing the pump from the tank and soak it

in chlorine bleach for at least an hour before working on it or servicing it.

NOTE: An automatic thermal overload protects the motor. Running the pump dry may overheat the motor and activate the overload

protector until the motor cools.

Key

Part Description

Qty.

Part No.

• Installation Hardware Kit (Incl. Key Nos. 1,2,3,4,5,6,7,8,9) 1

PKG 450

1 Check Valve 1

2 2 in.x32in.Schedule 40 PVC Pipe 1

3 Cord Grommet 1

4 2in.Adapt-A-Flex Pipe Grommet 2

5 1/2 in. Foam Gasket Material 1

6 Flat Washers–.320 I.D. 20

1/4 in.– 20 x 5/8 in. Hex Head Bolts

8 2 in. NPT x 2 in. Slip Adapter 1

9 5/16 in. x 2 in. Studs and Nuts 2

10 Pump 1 1001194470

•+ Wax Ring (Boxed) 1

• Not illustrated.

+ Purchase locally. See NOTICE: Floor Seal