Instructions / Assembly

4
Pre-Installation
Application
This sink tray system is designed for home application. Use this system only for pumping water. This system has not been
tested or approved for use in swimming pools or in salt-water marine areas. It is also not engineered to be run
continuously as a “fountain” or “waterfall” pump.
Installation Options
WARNING: To prevent lint from the washing machine’s discharge from clogging the pump and causing a flood, cover the end
of the discharge hose from the washing machine with a nylon stocking or filter. Regularly check nylon stocking or filter for
accumulation of lint that may prohibit proper water flow from the washing machine and replace as needed.
Installation for Laundry Sinks and Washing Machines – Typical
Installation for Wet Bar – Typical
Installation to Remove Air Conditioner Condensate or
Humidifier Water - Typical