Instructions / Assembly

HOMEDEPOT.COM
5 Please contact 1-877-297-6069 for further assistance.
A
B
C
D
E
F
G
Pre-Installation (continued)
Tools Required
Flathead
screwdriver
Phillips
screwdriver
Hand hacksaw
or PVC cutter
Wrench
Tape
measure
PVC primer
PVC cement
Safety
goggles
Thread
tape
Materials Required (not included)
Before using this pump, ensure you have the following items:
1-1/2 in. PVC
Schedule 40 Pipe
1-1/2 in. PVC
Schedule 40
Elbow
1-1/2 in. PVC
Schedule 40
Threaded Male
Adapter x 3
Nylon stocking
(washing machine
application only)
Product Description
Part
Description
A
Basin lid with bolts
B
Cord grommet
C
Lid gasket
D
Sump pump check valve and discharge pipe assembly
E
Basin with bolt inserts
F
Discharge pipe seal
G
3/10 HP Sump Pump with Vertical Switch
Ready Unit for Installation
o Remove basin lid A and discard all packing materials.
o Install discharge pipe assembly D into the threaded discharge opening
in pump G. Use Teflon tape, silicon sealant or plumber’s pipe dope to
seal the threads.
o Press discharge pipe seal F into the discharge socket on the
underside of basin lid A.
o Place gasket C onto basin E, aligning the holes.
o Pull pump cord all the way through the cord opening in lid A as shown.
o Place the discharge socket of lid A over discharge pipe D and position
the pump so that its float does not touch the basin walls and the bolts
of lid A are aligned with the inserts of basin E.
o Tighten the bolts of lid A. Make sure lid gasket C is in place as
shown.
o Pull any slack out of the pump cord and make sure it does not
interfere with float operation. Install the cord in grommet B and press
into the opening in lid A. Your unit is ready for installation.