Instructions / Assembly

HOMEDEPOT.COM
7 Please contact 1-877-297-6069 for further assistance.
Installation (continued)
3
Attaching the vent
connection
o Install a 1-1/2 in. PVC Schedule 40 threaded
male adaptor (1) (not included) into the vent
hole as shown. Use Teflon tape, silicon
sealant or plumber’s pipe dope to seal the
threads.
o Connect a vent pipe (2) (not included) to the 1-
1/2 in. PVC Schedule 40 threaded male
adaptor (1) using PVC primer and solvent
cement to properly seal the connection.
Connect the vent pipe to the sewer’s vent
system. We suggest that a union be installed
on this line to allow for easy pump service or
removal.
1
2
4
Connecting the power and
verifying proper operation
o Make sure that the cord grommet is
properly inserted into the lid. This assures
a water and gas tight seal.
o Plug the power plug into a 115V GFCI
power outlet.
o Check the pump by filling the sink tray
basin with water and observe the pump’s
operation through one complete cycle.