Product Brochure

Features and Benefits
• Features an 18 in. x 24 in., 22.5 Gal., heavy
duty sump basin with a water-tight snap-in
molded inlet hub
• Comes with the Everbilt HDS30 3/10 HP cast
iron sump pump
• Heavy duty structural foam injection molded
basin cover features a clear view removable
inspection plate, the sump DrainTrap cover
drain, 1-1/4, 1-1/2, or 2 discharge flange, 2 or
3 threaded vent flanges, reusable, molded
PVC cover seal and 8-bolts for a gas and
odor tight seal
• System pumps up to 3,160 GPH
• Ultra quiet Everbilt inline sump pump check
valve
• Molded inlet hub comes with a stainless steel
clamp for securing the inlet pipe
Performance
Th Everbilt Pre-Plumbed Sump Basin System is ide-
al for basement installations, pumping below grade
drainage and grey water. The system collects and
pumps wastewater to a sewer or an on-site
wastewater system. The system comes pre-
plumbed and ready to install; no internal plumbing is
required.
The system features an injection molded structural
foam polyethylene basin and cover that provides
superior structural toughness and reliability. It in-
cludes the Everbilt Model HDS30, 3/10 HP Cast
Iron Sump Pump. This Pre-Plumbed System also
includes the Everbilt Inline Sump Check Valve and
a water-tight molded 4 in. inlet hub.
Basin Dimensions
Store SKU #1002711122
Pre-Plumbed 1/2 HP Sewage System
Performance (Gallons Per Hour) Float Switch
Solids
Handling
TDH 0' 5' 10' 15' Shut Off On Off
THD1095 3160 2850 2150 1500 21’ 7.5” 3.25” 1/2”
Please contact 1-877-297-6069 for further assistance • HOMEDEPOT.com