Item # 1002 711 122 Model # THD1095 USE AND CARE GUIDE PRE-PLUMBED SUMP BASIN SYSTEM WITH 3/10 HP SUMP PUMP Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-297-6069 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Everbilt through the purchase of this sump system. We strive to continually create quality products designed to enhance your home.
Table of Contents Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Materials Required (not included). . . . . . . . . . . . . . . . . . . . . . 4 Product Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . .
Safety Information (continued) ELECTRICAL SAFETY CAUTION: Do not lift the pump by the power cord, WARNING: Do not splice the electrical power cord. CAUTION: Know the pump and its applications, limitations, and potential hazards. WARNING: Do not allow the electrical cord plug to be submerged. CAUTION: Periodically inspect the pump and system components to ensure the pump intake is free of mud, sand, and debris.
Pre-Installation APPLICATION This submersible sump pump is designed for pumping water with up to 3/8 in. diameter solids. The pump is built with overload thermal protections and auto reset. The pump is equipped with a 10 ft. 3-prong grounding-type power cord and tethered float switch. This pump operates automatically. Ball bearings on motor shafts never need lubrication.
Pre-Installation (continued) PRODUCT DESCRIPTION A C B D Part Description A Basin (with pump and discharge connection inside) B Cord grommet (inside Basin (A)) C 1.25 in. and 1.5 in. ABS In-Line Sump Pump Check Valve D 4 in. Snap-In inlet hub (inside Basin (A)) 5 HOMEDEPOT.COM Please contact 1-877-297-6069 for further assistance.
Installation 1 Preparing the basin for installation B □□ Reach your hand inside the inlet hole (1) through the basin (A) and remove the package that contains the inlet hub (D), check valve (C), and cord grommet (B). 3 □□ Reach your hand a second time inside the inlet hole (1) through the basin (A) and grab power cord (2). Thread the cords through the 2 in. hole (3) on top of the basin (A), removing all slack. Ensure the cord is not tangled around the pump or float switch.
Installation (continued) 3 Connecting the inlet piping □□ Connect the inlet piping (1) as required by code using the 4 in. snap-in inlet hub (D). Hand-tighten the hose clamp. □□ Carefully backfill with naturally rounded gravel or stone, larger than 3/8 in. and smaller than 3/4 in. diameter, around the periphery of the basin (A). D 1 A 4 Connecting the discharge piping 4 □□ Install a 1-1/2 in. PVC Schedule 40 threaded male adapter (1) (not included) into the discharge flange (2) as shown.
Installation (continued) 5 Attaching the vent connection □□ Install a 2 or 3 in. PVC Schedule 40 threaded male adaptor (1) (not included) into the vent hole (2) as shown. Use Teflon tape, silicon sealant, or plumber’s pipe dope to seal the threads. 3 □□ Connect a vent pipe (3) (not included) to the 2 or 3 in. PVC Schedule 40 threaded male adaptor (1) using PVC primer and solvent cement to properly seal the connection. Connect the vent pipe to the sewer’s vent system.
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-297-6069 HOMEDEPOT.COM Retain this manual for future use.
