Troubleshooting Guide

ManualsBrandsEverbilt ManualsPlumbing1/4 HP 2-in-1 Utility Pump

THANK YOU

We appreciate the trust and confidence you have placed in Everbilt Utility Pump. We strive to continually create quality

products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs

Thank you for choosing Everbilt!

TROUBLESHOOTING GUIDE

UTILITY PUMP

Model#

LTS250A

SBA025HPACK

UTA02510

PSUT03308AP

SSB300

SKU#(US)

1002303674

1002921354

1000026647

SKU#(CA)

1000427445

1000143218

1001102847

1001600783

Questions, problems, missing parts? Before returning to the store call

Everbilt Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-844-241-5521

WWW.HOMEDEPOT.COM

WWW.HOMEDEPOT.CA

Rev. 07/21/21

Utility Sink Pump - LTS250A, SBA025HPACK .......................................... Page 2

2-in-1 Utility pump - UTA02501 ................................................................. Page 3

Pool Cover Pump - PSUT03308AP ............................................................ Page 4

Waterfall Utility Pump - SSB300 ................................................................. Page 5

Summary of content (6 pages)

PAGE 1
TROUBLESHOOTING GUIDE UTILITY PUMP Model# SKU#(US) SKU#(CA) LTS250A 1002303674 1000427445 SBA025HPACK / 1000143218 UTA02510 1002921354 1001102847 PSUT03308AP / 1001600783 SSB300 1000026647 / Utility Sink Pump - LTS250A, SBA025HPACK .......................................... Page 2 2-in-1 Utility pump - UTA02501 ................................................................. Page 3 Pool Cover Pump - PSUT03308AP ............................................................
PAGE 2
Safety Warnings All electrical work should be performed by a licensed electrician. WARNING: Risk of electrical shock. Disconnect power to the pump before servicing. Do not handle the pump with wet hands or when standing on a wet or damp surface. WARNING: Risk of fire or explosion. Pump water only with this pump. Do not use this pump in the presence of flammable or explosive vapors. CAUTION: Motors run hot. Do not touch the motor housing during operation.
PAGE 3
2-in-1 Utility pump - UTA02510 Submersible Utility & Non-submersible Transfer. Pump does not start or run. Possible Causes Corrective Action 1. The circuit breaker has tripped. 2. The plug is disconnected. 1. Reset the circuit breaker by switching the breaker to the "ON" position. 2. Make sure the plug is securely connected. 3. The plug is corroded. 3. Clean the prongs of the plug. 4. The motor has failed. 4. Replace the pump. Submersible Utility Problem 1: Pump does not pump water.
PAGE 4
Pool Cover Pump - PSUT03308AP Problem 1: Pump will not start or run. Possible Causes 1. The circuit breaker has tripped. 2. The plug is disconnected. 3. The plug is corroded. 4. The motor has failed. 5. Water Sensor is clogged with debris. 6. Water depth is under 2 inches. Corrective Action 1. Reset the circuit breaker by switching the breaker to the "ON" position. 2. Make sure the plug is securely connected. 3. Clean the prongs of the plug. 4. Replace the pump. 5.
PAGE 5
Waterfall Utility Pump - SSB300 Problem 1: Pump will not start or run. Possible Causes Corrective Action 1. The circuit breaker has tripped. 1. Reset the circuit breaker by switching the breaker to the "ON" position. 2. The plug is disconnected. 2. Make sure the plug is securely connected. 3. The plug is corroded. 3. Clean the prongs of the plug. 4. Thermal overload protector tripped. 5. The motor has failed. 4.Unplug the pump for 30 minutes. Make sure the impeller is not stuck or clogged.
PAGE 6