E5 Carpet Extractor English EN Operator Manual Model 9004198-230V 9003734 Rev. 00 (03-2008) *9003734* www.tennantco.com Home Find... Go To..
EN OPERATION This manual is furnished with each new model. It provides necessary operation and maintenance instructions. Read this manual completely and understand the machine before operating or servicing it. A complete illustrated Parts Manual is also furnished with each new model. Use the Parts Manual to order replacement parts. To ensure prompt delivery, follow the “HOW TO ORDER PARTS” instructions printed in the Parts Manual. This machine will provide excellent service.
OPERATION EN FOR SAFETY: SAFETY PRECAUTIONS This machine is intended for commercial use. It is designed exclusively to clean carpet and upholstery in an indoor environment and is not constructed for any other use. Use only manufacturer’s recommended attachments. All operators must read, understand and practice the following safety precautions.
EN OPERATION GROUNDING INSTRUCTIONS This machine must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This machine is equipped with a power cord having an equipment--grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.
OPERATION EN MACHINE COMPONENTS 2 1 3 5 4 15 7 11 8 18 12 20 6 16 19 17 21 9 10 22 23 25 24 13 26 14 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Adjustable Control Handle Main Power On/Off Switch Cleaning Mode Switch Start Triggers Handle Adjustment Lever 15 m Power Cord Power Cord Strain Relief Clip Power Cord Hook 7.5A Machine Circuit Breaker Button 2.
EN OPERATION FILLING SOLUTION TANK MACHINE SETUP 1. Lift the cover and remove the solution tank from the machine (Figure 4). INSTALLING BRUSH FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. 2. Fill the solution tank with 19 L of clean water (50°C maximum temperature) (Figure 5). Partially fill if unable to lift a full tank. 1. Remove the brush idler plate from the brush base. Turn the idler plate locking knob counter--clockwise to remove (Figure 1). 2.
OPERATION EN CONNECTING POWER CORD MACHINE OPERATION 1. Plug the supplied power cord into the machine and attach the power cord to the strain relief clip as shown (Figure 7). FOR SAFETY: Do not operate machine unless power cord is properly grounded. Only use the manufacturer--supplied power cord which is designed exclusively for this machine. Do not use additional extension cords. 2. Plug the power cord into a properly grounded wall outlet (Figure 8).
EN OPERATION 2. Press the main power switch to the on ( I ) position (Figure 12). 3. Press the cleaning mode switch towards the vacuum/brush/solution mode (Figure 13). FIG. 12 7. View the water pickup from the recovery window (Figure 16). When the water pickup stops, unplug the power cord and empty the recovery tank. The machine is equipped with a vacuum shut--off float that will automatically stop the water pickup when the recovery tank reaches the full point.
OPERATION EN 4. Operate the accessory tool (Figure 22). WARNING: Fire or Explosion Hazard, Do Not Use or Pick Up Flammable Materials. FIG. 18 10. When transporting machine, roll the machine on both the main and rear tilt wheels. FIG. 22 MACHINE MAINTENANCE FOR SAFETY: When transporting machine, do not wheel up or down stairs. CLEANING WITH ACCESSORY TOOLS (Option) 1. Connect the accessory tool hoses to solution hose coupler and vacuum hose port located at the front of the machine (Figure 19).
EN OPERATION 2. Empty the recovery and solution tanks and thoroughly rinse with clean water (Figure 25). 5. Clean the brush of any debris, string, hair or carpet fibers (Figure 29). Clean the underside of the brush base (Figure 30). FOR SAFETY: Before tipping machine back, unplug power cord from wall outlet. FIG. 25 3. Clean the vacuum shut--off float (Figure 26) and the vacuum intake screen of any debris buildup (Figure 27). FIG. 29 FIG. 30 6. Clean the vacuum shoe slot of any debris (Figure 31).
OPERATION EN AFTER EVERY 100 HOURS OF USE STORING MACHINE 1. Flush the solution system with white vinegar to remove any chemical deposits. Pour 1/2 gal/2.2 L of white vinegar into the solution tank and operate the machine for 1--2 minutes, then let vinegar sit for up to six hours. Rinse solution system with water. Empty tanks and store the machine in a dry area in the upright position. Neatly wrap power cord around handle and cord hook. Remove the brush to prevent a flat spot. 2.
EN OPERATION TROUBLESHOOTING PROBLEM CAUSE SOLUTION Machine does not operate. Faulty power cord. Tripped circuit breaker. Brush does not spin Tripped circuit breaker. Replace power cord. Unplug power cord and determine cause. Reset 7.5 amp circuit breaker button. Contact Service Center if circuit breaker continues to trip. Unplug power cord and inspect brush for obstruction. Reset 2.5 amp circuit breaker button. Contact Service Center. Contact Service Center. Poor water pickup. Uneven or no spray.
OPERATION EN MACHINE SPECIFICATIONS MODEL E5 LENGTH 680 mm with handle folded WIDTH 490 mm HEIGHT 709 mm with handle folded WEIGHT 46.3 kg SOLUTION TANK CAPACITY 19 L RECOVERY TANK CAPACITY 19 L PRODUCTIVITY RATE -- AVG. 88 m2/hr CLEANING PATH WIDTH 380 mm BRUSH PRESSURE 11.3 kg BRUSH MOTOR 230V, .3 kW, 1.6 A, 1200 brush rpm VACUUM MOTOR 230V, .88 kW, 2--stage 5.7, 3.6 A WATER LIFT--AIR FLOW 2184 mm SOLUTION PUMP 230V, 0.081 kW, 2--stage 5.7, 0.35 A SOLUTION FLOW RATE 2.
