User manual

DESIGNED TO PERFECTION
USING THE MECHANICAL TIMER (OBES601)
To run the oven in Manual function (not using the timer) adjust the Timer control to the
position indicating M as shown on the picture, you can continuously operate your oven
(Figure 15). When the timer control knob is in the off (0) position, the oven will not
operate.
To set a time, rotate the timer control knob clockwise to a certain time range between 0
- 100 minutes, as shown on the picture. The oven will stop when the set time range is
completed, and the timer will give an audible warning once.
This is referred to as Manual use or Manual operation, when you want total control of
the cooking functions and cooking time.
NOTE: The oven will not operate unless the mechanical timer is set to a cooking time
(e.g. 30 minutes) or turned to the “M” position for manual use.
USING THE DIGITAL TIMER (OBES602)
Time of Day Adjustment:
The time must be adjusted before starting to use the oven. Following
power supply to the oven, the symbol (A) and the three “0” on the screen
will begin to flash. Press the (+) and (-) keys simultaneously. The
symbol will appear on the screen and the dot in the middle of the screen
will begin to flash. Using the (+) and (-) keys, adjust the day’s time while
this dot is flashing by pressing either the (+) or (-) keys. After the
adjustment, it should be expected that the dot and the
symbols will
remain continuously lit.
When the power is first turned on, the oven cannot be operated using the
control buttons. Once the time adjustment has been made (and the
symbol appears on the screen), you can manually operate the oven. As
the displayed time will be reset in the event of a power failure or power loss, the time adjustment operation
will have to be performed again before the oven will work.
Minute Minder:
This function can be used to receive an audible warning after a pre-set
time. It is used as a reminder & does not affect the cooking functions.
Press the MODE key in the middle. The
symbol and three “0”s will
flash on the screen. Adjust the desired time period (HH:MM) for the
warning by using (+) and (-) keys while the
symbol is flashing. Shortly
after the completion of the adjustment, the
symbol will begin to light
continuously and the current day’s time will be displayed. When the
symbol begins to light continuously, the minute minder has been set.
The minute minder can be set to a time between the time range of 0 and
23.59.
When the set time is up, the timer gives an audible warning and the
symbol begins to flash on the screen.
Pressing any key will stop the audible warning and the
symbol disappears on the screen.
The oven will not be turned off with this audible warning function.
There are 3 different auditable warning levels available. To choose between them, start with the timer
showing the time of day. Press the “-“ (minus) button for 1-2 seconds and the timer will give an audible
signal beep. At this stage, each time the “-“ button is pressed, the timer will sound the next audible warning
(signal beeps) in the sequence. Once the desired sound is heard, do not press any further buttons, and the
timer will save the last selected signal warning sound. This needs to be reset in the event of a power failure.
14