User Manual

Door Reversal Instructions
18
1. The front grill
A
must be opened before reversing the door. Grab the left and right bottom corner of the front
grill and pull it towards you. Slightly lift up the front grill until it’s top hooks unlock from the frame.
2. Locate 3 screws
B
on the top left corner of the door frame and 3 screws
B
on the bottom left corner of
the door frame. Remove these screws from the pre-drilled holes. They will be used to mount the door to the left
door frame later.
3. Locate the door switch tab on the top right door frame
F
. The tab is positioned to press on the door switch
that controls the interior lights and evaporator fans. Once the door is reversed, the tab must be moved to the
same location.
4. Locate the door spring shaft on the top right corner of the door
C- 1
. The head of the shaft has 4 screw holes,
one of which is occupied by a lock screw that maintains door spring tension
C- 2
. Remove the half ring shaft cap
to expose the remaining vacant screw holes.
7. Door Reversal Instructions
Some products have field reversible doors to accommodate specific kitchen layouts. Door reversals
must be performed by qualified technicians. A second person is required. Safety goggles must be worn
to protect from spinning parts. Warranty is void if the following guidelines are not met.
Before After
MANUFACTURING
MANUFACTURING
Lock Screw
Right Top
Hinge Shaft
Door Switch Tab
F
D
D
A
B
B
E
C
C
C- 2
C- 1
Lock Screw
Right Bottom
Hinge Shaft
D- 1
D- 2