User's Manual

UPOWER SOURCE:U
Battery Recharge
The device has Recharging the Battery a built-in DC
3.7V, 2800 mAh rechargeable Lithium-ion
Polymer batteries. Recharge as follows:
 Insert the small plug from the supplied AC/USB Adaptor to the Micro USB jack on the device. Plug
the AC/USB Adaptor to wall outlet having AC 100-240V~, 50/60 Hz.
 During charging, the on screen charging icon will turn on. When finished, it will show fully charged
icon.
This power unit is intended to be in a vertical or floor mount position.
Notes: Your battery will last longer if you follow these simple guidelines for caring for and storing it.
1. Using the supplied AC/DC Adaptor for charging only. Other models charger may damage the
device.
2. For charging first time, charge it approximately 10 hours. For normal charging, it needs
approximately 4 hours.
3. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
4. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until battery goes
empty will damage battery. Battery life will be extended if you keep the battery fully charged.
5. Battery life naturally shortens slowly over time.
6. The rechargeable battery incorporated in this product is not user replaceable.
Using the touch screen
− Touch the corresponding button on the touch screen with your finger.
− Touch the screen and swipe from Right to Left; Left to Right to scroll the pages.
Notes:
 Do not use force when touching the touch screen, as it may damage to the screen.
 To avoid damaging the touch screen, do not use any object other than your fingers.
 Do not touch on the touch screen if your fingers are not clean.
 Do not touch on the touch screen with gloves on.
 The touch screen may not function if you use a fingernail or other instruments
Micro SD card
This device supports a Micro SD Memory Card (Card not included). To increase memory size, insert an
Micro SD card into the card slot on the side of unit as the figure below:
6