User manual

INSTALLING MEMORY MODULE
Your computer comes with standard 256 MB, 512MB, 1024MB or 2048MB of
synchronous DDRII SDRAM. You can increase system memory to a
maximum of 4 GB, by installing two small outline double inline memory
modules (SO-DIMMs).
256MB, 512MB, 1024MB and 2048MB memory modules may be used to
upgrade your computer memory.
To install the memory module:
1.
Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2.
Turn the computer upside-down and locate the screw that secures the
DIMM door at the underside of the notebook.
3.
Remove the screws and open the DIMM cover by your finger.
4.
Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
+ Avoid Touching the exposed components inside the system. Doing so may
damage the system.