E V E R F O R E X C E L L E N C E User Manual *Covers StepNote SA Series Notebook Computers
Table of Contents Table of Contents CHAPTER 1..................................................................................................1 INTRODUCTION ................................................................................... 1 Getting Started .................................................................................2 Inventory...........................................................................................3 Safety and Maintenance ..........................................
Table of Contents Right Side Connectors ...................................................................36 Front Side Connectors ...................................................................37 Back Side Connectors....................................................................38 CHAPTER 4................................................................................................39 SYSTEM SOFTWARE .........................................................................
Chapter 1 Introduction
Chapter 1 Getting Started Congratulations on your decision to purchase an Everex® computer. Your new notebook features the most innovative features in portable computing technology. It combines state-of-the-art ergonomics with sophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use.
Chapter 1 Inventory This computer system is designed for years of productive and pleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to make repairs to your notebook during the warranty period. Update this section when you add new options.
Chapter 1 Safety and Maintenance You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: • Follow all warnings and instructions noted in this documentation and in the Windows Help program.
Chapter 1 • Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration. Checklists After opening the package, carefully inspect the contents. If any of the items is missing or appear damaged, contact your dealer.
Chapter 1 Features High Capacity Hard Disk Drive The computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files. Built-in Modem/LAN Capability A built-in 56k modem and 10/100 Mbps Ethernet port allows you to access the Internet or a local area network (LAN). LCD Your computer has an easy-to-view WXGA LCD panel. Built-in Stereo Speakers and Microphone The stereo speakers and internal microphone enable you to run a variety of multimedia applications.
Chapter 1 Where to Look For Information About Your Computer This User’s Manual describes the key elements of your computer. New users can find a simple step-by-step orientation in the Quick Start section of this chapter. About Windows Windows Online Help, found on the Start menu, offers extensive Windows assistance. Tour Windows XP offers an online orientation for new Windows users. Find it in: Start/Programs/Accessories/System Tools.
Chapter 1 Quick Start Turning on the Computer for the First Time 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter to the DC power port on the right side of your computer. 3. Connect the AC adapter power cord to an AC outlet. 4. Slide the cover latch in the direction of the arrows to open the LCD. 5. Open the LCD panel to a comfortable viewing angle. 6. Press the power button to turn on the power. Note: The battery is not fully charged.
Chapter 1 Loading Windows The following section is for installing the Windows operating system only. If you are installing a different operating system, please check with your vendor for installation details. Your computer will begin loading Windows once you turn on the power. Wait a few seconds for Windows setup to load.
Chapter 1 Adjusting the Volume You can adjust the volume with hot key combination as below: • Fn + F8 decreases the volume • Fn + F9 increases the volume • Fn + F10 Mute the volume Alternatively, you can adjust the volume with the Windows volume control applet located on the taskbar.
Chapter 1 Turning off Your Computer Turning off the computer properly is important to maintaining your computer. 1. On the Start menu, click Turn off Computer. 2. Click the radio button Turn Off in the Turn off Computer Windows screen, and then click OK. If you are going to be away from the computer for a short period, there are ways of conserving power without shutting down the system. See Chapter 5, Power Saving Modes, for details. Warning: Shutting off the computer improperly may result in data loss.
Chapter 1 Tips for New Owners Take responsibility for backup Back up files often. Users who need to manage large amounts of data may wish to use backup devices such USB drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.
Chapter 1 Never take the notebook anywhere without the carrying case A broken screen or case can be costly to repair. Prevent accidents by carrying the computer in a suitable carrying case. Consider using a lock For added security, consider purchasing a Kensington lock to put into the Kensington lock hole on the back side of your computer (see Chapter 2, back View). Use the Kensington lock to secure the computer to a desk or table.
Chapter 2 Getting Started
Chapter 2 Hardware and Software This chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems. Getting Started Before you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system. Lift the LCD screen and open up the computer.
Chapter 2 Front View 1. LCD panel 7. Wireless LAN switch 2. Power button 8. Media Player button 3. Keyboard 9. Microphone-in jack 4. Status indicators 5. Touchpad 10. Audio-out jack for external speakers or headphones 6. Touchpad buttons 11. MS/MMC/SD/MS Pro card slot 12.
Chapter 2 Left View 1. Kensington lock hole 2. DC in jack 3. IEEE 1394 slot 4. Optical drive 5.
Chapter 2 Right View 1. USB ports 2. Express 34/54 card slot 3.
Chapter 2 Back View 1. Fax/modem RJ-11 jack 2.
Chapter 2 Bottom View 1. Ventilation slot 2. Battery release latch 3. Battery 4.
Chapter 2 LED Status Indicators The status indicators in the upper left corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked with a symbol. CD-ROM Drive The computer is reading information from the optical drive. Number-Lock The keyboard is in Num-Lock mode. Caps-Lock The keyboard is in Caps-Lock mode. Power Indicators The power indicators show which power source the system is using.
Chapter 2 Function Keys Hold the Fn key while pressing the numbered function key. Function key Description Fn + F3 Toggles display on/off Fn + F4 Suspend to RAM/HDD Fn + F5 Toggles between LCD/CRT displays Fn + F6 Decreases LCD brightness Fn + F7 Increases LCD brightness Fn + F8 Decreases Volume Fn + F9 Increases Volume Fn + F10 Mute Volume Numeric Keypad The embedded numeric keypad consists of ten keys that make number intensive input more convenient.
Chapter 2 Touchpad The touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen. Touchpad buttons Touchpad The instructions listed below describe how to use the touchpad. 1. First, place your fingers on the keyboard in the normal typing position. The touchpad is easily accessible by moving either your left or right thumb off the space bar and on to the touchpad. 2.
Chapter 2 5. Double-clicking is a common technique for selecting objects or launching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the left button two times. This action is commonly referred to as “doubleclicking” an object. Dragging There are two ways to drag: • Move the pointer to the desired location then press down the left button. While still holding down the left button, move the pointer to the desired location. Release the button.
Chapter 2 The Optical Drive Your computer comes with a pre-installed Optical drive. The optical drive can read or write both DVDs and CDs. Your notebook identifies the drive with the letter following the hard drive letter. If your hard drive is D, then the optical drive will be E. Inserting a Disk 1. Press the button on the front of the drive to open the disk tray and pull the tray open. 2. Place the disk on the tray, label side up. 3.
Chapter 2 • Extremes in temperature may damage discs. Store discs in a cool dry place. • Do not use benzene, thinners, or cleaners with detergent. Only use optical cleaning kits. • Do not bend or drop the discs. • Do not place objects on top of discs. Warning: Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually. When not in use, keep the tray closed to prevent dust or dirt from entering the drive unit.
Chapter 2 The Express Card Slot The express card slot can be used as an interface between your computer and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, or provide additional data storage capacity. Installing a Card 1. The top side of a express card is usually identified with a label. Insert the card into the slot with the label side up and the edge with pinhole contacts going in first. 2. Insert the card into the slot.
Chapter 2 Express Card Size Restrictions • The card will not able to eject if it is less the 75mm.
Chapter 2 The Graphics System Your computer has a high-performance graphics system, which can easily handle the demands of today's multimedia computing. Screen Controls Brightness Function keys can increase or decrease the brightness of the monitor. • + decreases the LCD panel brightness • + increases the LCD panel brightness Resolution • Click My Computer/Control Panel/Display/Settings. Click the Settings tab. The dialog box indicates the monitor resolution.
Chapter 2 made in this dialog box. Dual Displays With Windows system, you may use an external monitor simultaneously with your notebook’s LCD. You may also use the external monitor only and disable the LCD or only use the LCD. To do this you may first need to enable the multiple display settings in Windows XP. 1. Open the Control Panel. 2. Double-click Display. The Display Properties window opens. 3. Click the Settings tab. 4. Click the Advanced button. 5. Click the Display Modes tab.
Chapter 2 These options are described below. Single You can choose which device to apply as the Primary display. In Single mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. Mirror In Mirror mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. If the external CRT is connected, the display on the LCD and the CRT is the same.
Chapter 2 Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys. Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD.
Chapter 2 Information about the Wireless LAN button Wireless LAN button Even when a Wireless LAN module has not been built-in to your computer, the Wireless LAN indicator lights and remains active when you turn on the Wireless LAN button near the power button of your computer. If Wireless LAN module has been built-in, your notebook will search for the device and will display an icon on the Windows task bar.
Chapter 3 Making Connections
Chapter 3 Making Connections Your computer is equipped with a full array of ports and connectors, including standard input/output (I/O) ports for quickly and easily adding peripheral devices such as printers, keyboards, and mice. Refer to documentation included with individual devices for details on connecting these devices to your computer. Along with the standard ports found on most computers, your computer also includes IEEE 1394 ports, modem and LAN ports, offering advanced communications technology.
Chapter 3 5. Disk Eject Button Press the eject button to eject the disk tray. The manual eject keyhole is located next to it and allows you to manually eject a jammed disc. Right Side Connectors 1. USB 2.0(Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attaching monitors, input devices, scanners, and other devices to a PC. USB devices can be chained together on a single cable. 2. Express 34/54 Card Slot This slot is where a express 34/54 card is inserted. 3.
Chapter 3 Front Side Connectors 1. Wireless LAN On/Off Build in wireless LAN card IEEE802.11A/B/G for user accessing the Internet without wire cable through by this switch On/Off. 2. Microphone-in Jack Connect a microphone to this jack to record. 3. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen to multimedia. 4. MS Pro/MS/MMC/SD 4-in-1Card reader slot The 4-in-1 card reader slot is specially used for the device with a MS Pro/MS/MMC/SD interface card.
Chapter 3 Back Side Connectors 1. Fax/modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol, and send and receive faxes at 14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system. In this case, you may use an add-on modem. 2. LAN RJ-45 Jack With the built-in Ethernet LAN combo, you can make LAN connections. Connection speed is up to 100 Mbps. Warning: Plug your modem into an analog telephone jack only.
Chapter 4 System Software
1 Instant Recovery Software No need to locate a recovery CD to restore your software settings, it is already pre-installed on your notebook hard drive. Simply follow the steps below and restore your notebook to the original factory settings. How to Access Your Instant Recovery Software 1. Turn your computer on and press F4. 2. Click Protect/Recover on left hand menu. 3. Click Phoenix FirstWare Recover Pro. 4. System restarts and will take 15 seconds until the next step is displayed. 5.
Chapter 5 Power Management
Chapter 5 Power Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps: • Plug in the AC adapter. Restart the computer and when the startup screen appears, press Del key to enter the BIOS Setup Utility. In the BIOS Setup Utility, select Advance settings.
Chapter 5 Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/Control Panel/Power Options; then click Power Meter. 2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status. If you do not see the battery icon, enable it in Start /Control Panel/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.
Chapter 5 Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge. While the battery is charging, the Battery Charge icon on the Indicator panel will be active. When the battery is fully charged, the Battery Charge icon will turn off.
Chapter 5 • Closing the screen cover (assuming no external monitor has been connected). • Pressing the power button (if enabled in power settings). • Pressing the suspend function key + . Power Button Settings The function of the power button can be set to Shutdown or Standby in the Power Management Properties dialog box in the Windows Control Panel.
Chapter 5 When to Replace the Battery Over time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to store significantly less charge. Changing the Battery Change the main battery pack as follows: 1. Turn off the computer. 1 1 2. Close the screen cover and turn the computer over. 3. Slide the side battery latch (1) away from the battery. Continue to hold it until the battery is removed. 4. Remove the battery. 5.
Chapter 6 Using the BIOS Setup Utility
Chapter 6 Using the BIOS Setup Utility Your notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optional functions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup Menu The BIOS setup Utility allows you to configure your computer’s basic settings. When you turn your computer on, the system reads this information to initialize the hardware so that it can operate correctly.
Chapter 6 Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information: Å Æ Select Screen Push the up and down arrow keys to move among selections, then press Enter to make a selection. + - Change Option Tab Select Field F1 General Help F10 Save and Exit ESC Press Esc to exit any section. If you wish to exit the BIOS utility without saving changes, go to the main menu, then press Esc.
Chapter 6 The Main Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Use [ENTER] , [TAB] System Overview Or [SHIFT-TAB] to select a field. AMIBIOS Build Date: 05/09/06 Use [+] or [-] to Configure system Time Processor Type : Genuine Intel® CPU T2300@ Speed :1666MHz System Memory Size : 1016MB ←→ Select Screen System Time [19:14:50] System Date [Thu 01/01/2006] ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.
Chapter 6 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Battery Learning Function Advanced Setting Battery Calibration [ Enter ] Start FAN Calibration [ Enter ] Auto DIM function [ Enable] Legacy USB Support [ Auto ] ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Chapter 6 Boot menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Specifies the boot sequence from the 1st Boot Device [CD/DVD: 3M-_NEC] 2 nd Boot Device [SATA : PM-HTS541080G] available devices. 3rd Boot Device [Networking: Realtek Bo] A device enclosed in Parenthesis has been disabled in the corresponding type menu. ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Chapter 6 Security menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Install or Change the password. Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password ←→ Select Screen ↑↓ Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit V02.59 ©Copyright 1985-2005, American Megatrends , Inc.
Chapter 6 Exit menu BIOS SETUP UTILITY Main Advanced Boot Security Exit Exit Options Exit system setup Save Changes and Exit after saving the changes. Discard changes and Exit F10 key can be used Discard Changes for this operation. Load Optimal Defaults ←→ Select Screen ↑↓ Select Item Enter Go To Sub Screen F1 General Help F10 Save and Exit ESC Exit V02.59 ©Copyright 1985-2005, American Megatrends, Inc.
Chapter 6 Change User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Change Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter. You will be prompted for the new password, and then again to verify it.
Appendix A Frequently A sked Questions
Appendix A Frequently Asked Questions Q: My screen seems to time out too quickly. I have to constantly hit a key or move the mouse in order to bring it back. How can I adjust the screen time-out? A: This is part of Windows Power Management. Access Power Management by clicking on Start / Settings / Control Panel / Power Management. Adjust the display time-out by selecting a time next to the Turn off monitor option. You may also select different time-out values for adapter and battery power states.
Appendix A A: Double click on the Speaker icon on the task bar. Then, under Microphone Balance, check the Mute box. Q: Because of a software problem, I was unable to shut down power normally. I pressed the power button to force a power off, but it didn't work. How can I force a power off? A: Make sure you press the power button for at least 4 seconds. Normally, this will force a power off. If this does not work, you can shut down the computer by inserting a needle into the reset button pinhole.
Appendix A Save configuration changes and exit setup? [OK] [Cancel] 59
Appendix B Statements
Appendix B Statements Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix B About The Modem This equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. The modem jack of this equipment complies with Sub-part F of Part 68 of FCC rules. The REN is used to determine the quantity of devices that may be connected to the telephone line.
Appendix B The Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, othe
Appendix B z In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use.
Appendix B Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. About the Modem The Industry Canada label identifies certified equipment.
Appendix B "The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device. To prevent overloading, the termination on a loop may consist of any combination of devise subject only to the requirement that the total of the Load Numbers of all the devices does not exceed 100." Battery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE BATTERY. IT MUST BE DISPOSED OF PROPERLY.
TECHNICAL SUPPORT For the latest Drivers and Support Documents or to chat online with a Live Technician visit www.everex.com To contact Technical Support via email, send your User Name, Model, Serial Number and a brief Description of the issue at hand to techsupport@everex.com To register your product visit www.everex.com or simply email your User Name (first and last), Model (example: SA2050T) and Serial Number to customerservice@everex.com.
