Do it All with the Everex® StepNote® VA Series Notebook Computer. Preinstalled with Windows® XP Media Center Edition and running on the power of an Intel® Celeron® Processor, the latest PCs from Everex lets you view the latest DVDs, create your own CDs, surf the Internet or email friends and family, all on a 15.4” widescreen display. StepNote® VA Series Notebooks* * All Trademarks and Tradenames are the Sole Property of their Respective Owners. All Rights Reserved. 15.
N otebook User Guide Copyright©2006 All Rights Reserved - Printed in Taiwan Notebook Computer User Guide Original Issue: 2006/11 This manual guides you in setting up and using your new notebook computer. Information in this manual has been carefully checked for its accuracy and is subject to change without notice.
N otebook User Guide FCC Information to User Safety and Care Instructions No matter what your level of experience with computers, please make sure you read the safety and care instructions. This information can help protect you and your computer from possible harm. Radio and television interference Warning: Use the specified shielded power cord and shielded signal cables with this computer, so as not to interfere with radio and television reception.
N otebook User Guide You may find helpful the following booklet, prepared by the Federal Communications Commission: Interference Handbook (stock number 004000-00345-4). This booklet is available from the U.S. Government Printing Office, Washington, DC20402 Warning: The user must not modify or change this computer without approval. Modification could void authority to this equipment.
N otebook User Guide Peripheral Devices Notice Only peripherals (input/output devices, terminals, printers, etc) certified to comply with Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Optical Disk Drive Notice The optical disk drive is Class 1 Laser Product.
N otebook User Guide (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards: EN 300 328-2 V.1.2.1 (2001-12) EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09) EN 50371: 2002 EN 55022: 2001 EN 55024: 2001 EN 60950: 2000 EN 61000-3-2: 2000 EN 61000-3-3: 1995 + A1: 2001 802.
N otebook User Guide PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.’ “This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
N otebook User Guide About Your Notebook Computer Congratulation for having purchased your new Everex StepNote. This notebook incorporates the newest features to serve all your computing needs.
N otebook User Guide About Your User Guide Welcome to your Everex StepNote User Guide. This manual introduces you to the basic concepts of your new computer. This manual is divided into eight chapters.
N otebook User Guide Table of Contents ABOUT YOUR NOTEBOOK COMPUTER.......................................... 8 ABOUT YOUR USER GUIDE................................................................. 9 1 INTRODUCTION............................................................................. 15 1.1 1.2 1.3 FEATURE HIGHLIGHT .................................................................... 16 UNPACKING THE COMPUTER .........................................................
N otebook User Guide 3.3 3.4 3.5 3.6 3.7 4 MICROSOFT MEDIA CENTER.................................................... 55 4.1 4.2 4.3 5 WHAT IS WINDOWS XP MEDIA CENTER EDITION 2005?............... 56 STARTING THE WINDOWS XP MEDIA CENTER FOR THE FIRST TIME ...................................................................... 56 ENJOY YOUR MEDIA CENTER ........................................................ 63 CONNECTING TO PERIPHERALS ............................................. 69 5.1 5.2 5.3 5.
N otebook User Guide 6.3 6.4 6.5 6.6 6.7 7 USING THE ADVANCED CMOS SETUP........................................... 84 SECURITY MENU SETUP ................................................................ 86 USING THE BOOT SETUP ................................................................ 88 HOW TO EXIT THE SETUP PROGRAM.............................................. 89 HOW TO UPGRADE THE BIOS........................................................ 90 USING OPTIONS ....................................
N otebook User Guide Flash BIOS ................................................................................. 110 I/O Ports ..................................................................................... 110 Wireless devices.......................................................................... 110 AC/DC Power Supply Adapter ................................................... 110 Battery ........................................................................................
N otebook User Guide This page is intended to be blank.
1 Introduction 1 Introduction Your Everex Computer is a fully Windows® compatible portable computer. With the latest features in mobile computing and multimedia technology, this notebook is a natural choice for uses seeking portability and performance. Your Everex StepNote VA Series Notebook runs a wide variety of business, personal productivity, entertainment and professional applications and is ideal for use in the office, home and on the road.
N otebook User Guide 1.1 Feature Highlight Before we identify each part of your Everex StepNote Notebook, we will first introduce you to other notable features of your computer. Processing Unit • Your notebook runs on Intel® Celeron® M microprocessor that is integrated with 1MB L2 Cache. Check with your dealer on the CPU type and speed. • Fully compatible with an entire library of PC software based on operating systems such as Windows MCE.
1 Introduction USB 2.0 Provides three USB2.0 ports for fastest I/O data transmission. Graphic System VIA Chrome9TM HC IGP provides blazing graphics embedded in the VIA VN896 chipset PCI Local Bus Architecture • 32-bit PCI Enhanced IDE optimizes the data transfer between the CPU and SATA hard disk drives. Support ultra DMA ATA-150 PIO Mode up to PIO Mode 4, bus mastering for LBA Scheme. Audio System Full-duplex 16-bit stereo audio system output. Sound Blaster compatible.
N otebook User Guide 1.2 Unpacking the Computer Your computer comes securely packaged in a sturdy cardboard shipping carton. Upon receiving your computer, open the carton and carefully remove the contents.
1 Introduction 1. Color Widescreen LCD Display 3. Keyboard 5. Power On/Resume Button • 2. Built-in Speaker 4. Touchpad Pointing Device 6. LED Indicators Color Widescreen LCD Display The notebook computer comes with a color LCD that you can adjust for a comfortable viewing position. The LCD is 15.4” TFT color LCD with 1440x900 (Wide XGA with ratio 16:10) resolution panels. The features of the Color LCD Display are summarized as follows: ⇓ TFT color LCD with Widescreen 15.
N otebook User Guide ⇓ 20 Simultaneous display capability for LCD and external desktop computer monitor. • Built-in Speaker Integrated mini speaker provides sound and audio output for your multimedia presentations or listening pleasure. • Keyboard ⇓ Standard QWERTY-key layout and full-sized 87 keys keyboard with Windows system hot-keys, embedded numeric keypad, 6 hot keys, inverted "T" cursor arrow keys, and separate page screen control keys.
1 Introduction NOTEBOOK STATUS ICONS The Status LED Panel keeps you informed of the notebook’s current power and operating status. Each LED is marked with an icon to designate the system status. 1. Power Indicator 3. Drive Access 5. Caps Lock 7. Num Lock • • 2. Battery Charging LED 4. Wireless LAN Access 6. Scroll Lock Power Indicator Lets you know that power to the system is turned on. This LED is positioned so that you can see the power state whether the LCD panel is opened or closed.
N otebook User Guide 22 ⇓ Lights orange to indicate that the battery is in charging. ⇓ When the light is off, it indicates the battery is fully charged or no battery installed. • Drive Access When LED turns on indicates that the system is accessing the Hard Disk or Optical Disk Drive. • Wireless LAN Access When LED turns on indicates that the wireless LAN module is activated. When LED lights off, it indicates that the function is disabled.
1 Introduction 1.4 The Front Side of the Notebook 1. Cover Switch • 1.5 Cover Switch The cover (LCD panel) is locked when it is closed. Slide the button right aside to release the latch for opening the cover of the computer. The Rear Side of the Notebook The system ports at the back of your notebook computer can connect various devices. Each port is described in detail: 1. USB 2.0 Ports 2. VGA Port 3.
N otebook User Guide 24 • USB 2.0 Ports The Universal Serial Bus (USB) port allows you to connect USB 2.0compliant devices (for example, printers, scanners and so on) to your notebook computer. • VGA Port Lets you attach an external monitor or projector for wider display. You can run the LCD display and the external monitor simultaneously or switch it to monitor only using the display hot-key.
1 Introduction 1.6 The Left Side of the Notebook The left side of your notebook computer provides the features shown in the following figure. 1. Modem Port 2. Optical Disk Drive • Modem Port A 56K internal fax/data modem is installed. It keeps you connected to the outside world through phone line. + For electrical safety concerns, only use telephone cables rated 26AWG or higher.
N otebook User Guide 1.7 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
1 Introduction Right Side Features 1.8 • Microphone Jack Allows you to connect an external microphone for monophonic sound recording directly into your notebook computer. • Headphone Jack Lets you plug in a stereo headphone, powered speakers, or earphone set with 1/8 inch phono plug for personal listening. • USB 2.0 Port The Universal Serial Bus (USB) port allows you to connect USB 2.0compliant devices (for example, printers, scanners and so on) to your notebook computer.
N otebook User Guide 1. Hard Disk Compartment 3. Battery Bay 5. Memory Compartment 2. Battery Lock Latch 4. Wireless LAN Compartment 6. Battery Release Latch Bottom of the System 28 • Hard Disk Compartment Open this cover of this compartment to replace with other Hard Disk Drive. Please refer to Chapter 7 for how to replace it. • Battery Lock Latch Push the latch to the right side to lock and secure the battery.
1 Introduction • 1.9 Battery Release Latch To release the battery, first make sure the computer is turned off, unplugged from power source. Locate the Battery Lock Latch at the left side in unlock status, then push the Battery Release Latch to the right end to remove the battery pack. Notebook Accessories AC Adapter The AC Adapter supplies external power to your notebook computer and charges the internal battery pack simultaneously.
N otebook User Guide 1.10 Notebook Options DVD/CD-RW Combo Device Pack This device pack can write data to CD-R or CD-RW CD for you to backup the data and also can read DVD/CD title. DVD dual (Dual Rewritable DVD combo) Device Pack This device pack combines following two standard packs. Using the suitable media, you can make any format of CD or DVD as you want. DVD-RW combo: This device pack can write data to CD-R or CD-RW and DVD-R or DVDRW media and also can read DVD/CD title.
Getting Started 2 2 Getting Started Your Notebook is designed and pre-configured for easy setup and use. This chapter describes the installation steps you should follow to get the notebook up and running as quickly as possible.
N otebook User Guide 2.1 Using the Battery Pack The notebook is designed to operate with one of the following power sources: • With AC power using the AC adapter connected to an electrical outlet. • With a Lithium-Ion (Li-Ion) battery pack. You should use the AC adapter whenever it is possible, relying on the battery pack only when AC power is unavailable. Before you use your notebook computer, install and recharge the battery pack first.
Getting Started 2 Installing the Battery Pack This notebook provides the most convenient way to install the battery pack into your computer. With the extended nose directed toward the compartment, insert and push the battery pack. Removing the Battery Pack To remove the battery pack, make sure the computer is turned off, unplugged from power source.
N otebook User Guide Replacing the Battery Pack When your notebook estimates that the battery only has enough charge to continue for a few minutes, it will alert you with a battery low warning beep. If you are consuming a lot of power by using the audio system, the hard disk drives, and optical disk drive, your notebook might run out of charge much sooner than you expect.
Getting Started 2.2 2 Connecting the AC Power Source The AC adapter provides external power source to your computer and charges the internal battery pack at the same time. The AC adapter also has an autoswitching design that can connect to any 100VAC ~ 240VAC power outlets. To connect the power adapter: 1. Plug the AC power cord into the power socket of the AC power adapter. 2. Plug the other end of the AC power cord to a live AC wall outlet. 3.
N otebook User Guide + 2.3 y For the power supply of this equipment, an approved power cord has to be used. y Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices. y Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC adapter). Starting Your Computer The Power/Resume button is found on the top of the base unit.
Getting Started 2 After the test, the screen will also display a message "press to enter SETUP". You don’t need to run this program at the moment as your dealer already made the necessary settings for your computer optimal operation. Refer to Chapter 6 on running the SETUP program later. After the test has completed, your computer will start to search and boot up the operating system from your hard drive.
N otebook User Guide More importantly, never close the LCD panel for a long period of time when computer is on and power saving features are disabled.
Using Your Notebook 3 3 Using Your Notebook This chapter describes how to operate the standard built-in features of the Everex StepNote. If you are unfamiliar with personal computers or the Microsoft® Windows® operating system, in addition to this chapter, we recommend reading the Windows® Help and Support page located on your computer.
N otebook User Guide 3.1 Starting Your Operating System The operating system is the software foundation for your computer. It is the platform for all your software application programs to run on. The most popular operating system today is Microsoft® Windows®. The StepNote computer comes with an operating system pre-installed and needs only to be setup and configured during initial use. 3.
Using Your Notebook 1. Function Keys 3. Windows Start Menu Key 5. Windows Shortcut Key 3 2. Control Keys 4. Control Keys 6. Cursor Control Keys Keyboard Key features and operations are described below: • Function Keys Function keys are application-driven, like F1 through F12 can be found on the keyboard. These keys work together with the Fn key to activate special functions. Some keys (printed in blue on keypad) are preprogrammed with dual functions.
N otebook User Guide • Typewriter keys Typewriter keys (also called alphanumeric keys) are used to enter text and characters. Keys with blue print on them behave differently when combined with control keys. BASIC KEYBOARD FUNCTIONS Keypad Function Description key. Execute a command. Within many text editing application programs, the key inserts a hard carriage return, just like what ordinary typewriter does. key. Press this key to cancel or escape from a command or function.
Using Your Notebook Keypad 3 Function Description used in most application program in combination with other keys to execute a certain command. key. Press this key to move the cursor to the next tab stop on the right. This key works much the same as in ordinary typewriter. key. Known as the Control key. Used in most application program in combination with other keys to execute a certain command. + key. Known as the Alternate key.
N otebook User Guide Keypad Function Description Left arrow key. Moves the cursor to the left one space at a time. Right arrow key. Moves the cursor to the right one space at a time. SCREEN CONTROL KEYS Keypad Function Description key. Moves the cursor to the beginning of a screen or line. key. Moves the cursor up one screen at a time key. Moves the cursor down one screen at a time key. Moves the cursor to the end of a screen or line.
Using Your Notebook Keypad 3 Function Description key. Performs a mouse right-click function for Windows system. SPECIAL FUNCTION KEYS The notebook has special system function keys that activate key serving dual functions. When pressed in conjunction with the key, these keys set specific system parameters and are sometimes referred to as "hot keys". Keypad Function Description + Switches display between LCD, CRT, or LCD and CRT simultaneously.
N otebook User Guide Keypad + 3.3 Function Description Increases the audio volume of the notebook incrementally. Using the Touchpad Pointing Device Your computer comes with a built-in Touchpad pointing device that is found on the center of the palm-rest surface. The Touchpad offers a number of options that let you customize how it functions. To access these options, locate the Control Panel and double click on the Mouse icon.
Using Your Notebook 1. Left Selection Button 3 2. Right Selection Button 3. Touchpad Touchpad Features Here how to use the Touchpad pointing device: 1. The rectangular surface acts like a miniature duplicate of your display screen. To move the mouse cursor, place the finger lightly on the sensor pad and move in the desired direction. If you reach the end of the pad, lift your finger and place it back down on the other side of the pad. 2.
N otebook User Guide 3.4 3. To simulate holding the mouse button down (dragging an icon or selection), use the tap-and-drag gesture. This feels much like a doubleclick, except that the finger remains on the pad after the second tap: Tap, lift, tap, hold and move. The simulated button remains held as long as the finger remains on the pad. + Avoid spilling any liquid on the Touchpad surface and always keep the Touchpad surface and pointing finger dry from sweat built-up.
Using Your Notebook Display Possible Resolution Maximum Colors Widescreen 15.4” WXGA LCD CRT Only 1440x900 (Maximum Resolution) 800x600 1024x768 1152 x 768 1280x1024 16 million colors 3 16 million colors 16 million colors 16 million colors 16 million colors + 65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or 16M colors is equivalent to 32-bit true color.
N otebook User Guide 3.5 Knowing the Power Saving Features Aside from its superior performance, one of the great features in your notebook computer is the ability to conserve power. Your computer is designed to incorporate intelligent and advanced power management functions that turn off power of most components when system is idle or not in use. This feature not only gives you longer battery life but also cools the systems and components as well.
Using Your Notebook 3 goes into hibernation, Windows saves your entire desktop state before powering down your computer. You don’t need to save and close each document before you put your notebook into hibernation. When you press power button again, system will bring your notebook out of hibernation. You'll find your applications and documents open on your desktop exactly as you left them. + Hibernation is enabled by default.
N otebook User Guide 3.7 How to Access the Optical Drive Your system ships with an optical disk drive installed on the left side of your computer. You would normally use the drive for installing operating system and software application programs. To insert and remove a disc on the drive: 52 1. Make sure the computer is turned on. Press the eject button found on the door cover of the combo drive. The DVD/CD tray mechanism will popout slightly and slowly pull out the whole length of the tray. 2.
Using Your Notebook 3 + If the eject function is disabled by software or a power failure occurs, the Emergency Eject Hole allows you to manually remove a CD from the reader. 4. To close the optical drive, simply push the CD tray inside. The optical drive LED will activate when the disc is detected. Wait until the LED has turned off and then start to read the disc. How to care the Optical Disks (CDs, DVDs, etc.
N otebook User Guide This page is intended to be blank.
Microsoft Media Center 4 4 Microsoft Media Center This notebook integrated in a highly compact platform is designed for digital entertainment. That means you can take charge of your media, share moves, TV, photos, and music with your friends and family. It simplifies our digital life.
N otebook User Guide 4.1 What is Windows XP Media Center Edition 2005? Windows XP Media Center Edition 2005 is an operating system that enables you to enjoy the best in home entertainment on your notebook. With Media Center Edition 2005, you can store, share and enjoy all of your photos, all of your music, all of your home video and even recorded TV. It’s all contained in one control system.
Microsoft Media Center 1. + 2. 4 Click the Start button, then select Media Center to launch Media Center. The first time you start Media Center, the Welcome screen appears. The Media Center setup wizard requires an Internet connection to complete the process. Press the NEXT button to continue.
N otebook User Guide Read the on-screen information and select your option, then system will automatically configure your setting. 3. 58 You can now begin to select your option item “1 Required Setup” on the screen and set up your TV signal (Optional), then press NEXT to continue.
Microsoft Media Center 4. This screen informs you the Media Center Privacy Policy. Read and accept it. Press NEXT to continue. 5. The Enhanced Playback screen lets you connect to a variety of multimedia information. Select Yes and press Next to continue.
N otebook User Guide Follow the on-screen instructions to select your option and complete the setting of Join Wireless Network and Internet Connection. The system will detect the signal and finish most of the setup for you. If not, follow the on-screen instructions. 6. 60 The Internet Connection screen lets you to test your Internet connection. Select Test. When the test is finished. Press Next to continue.
Microsoft Media Center 4 7. The Optional Setup screen allows you customize your Media Center. When you finished your settings. Select Setup finished and press Next. 8. The You Are Done screen is the final screen of Media Center Setup Wizard. Press Finish button to complete Media Center Setup and start Media Center.
N otebook User Guide 9. Now here comes the Windows XP Media Center Edition 2005. To enjoy the full benefit of Media Center, you can always go to the screen to change the setting.
Microsoft Media Center 4 To change the setting, please select the option item by item as shown on the above screen, then it will appear Settings option. You can set the parameters with Settings option any time. + 4.3 When you watch TV, please be sure to install the following components. * TV Tuner (Optional) driver * SW encoder * DVD decoder Enjoy Your Media Center Media Center extends the experience you have ever had.
N otebook User Guide Take your time and get familiar with the basics behind the Media Center menu system and using an optional remote control with your notebook. Easily view your pictures With Microsoft Windows XP Media Center Edition 2005, you can display slide shows of your digital pictures anytime. Watch DVDs Enjoy watching DVDs with Microsoft Windows XP Media Center Edition 2005. Just put the DVD in your system's optical drive, and then use your optional remote control to start it.
Microsoft Media Center 4 This notebook provides the enjoyment for watching DVDs with Microsoft Windows XP Media Center Edition 2005. You can use optical drive to watch your favorite DVDs. 1. Slot in a DVD into the DVD drive. 2. Select Play DVD on the screen. 3. Use the relative buttons on the screen or the optional remote control to navigate the DVD menu. You can return to the DVD menu at any time by pressing the DVD menu button on your optional remote control or use the Play DVD Screen.
N otebook User Guide 4. In the Guide, find the TV show (Optional) you want to record. Highlight the title of the show, and press the RECORD button on your optional remote control. Press once to record the show; press a second time to record the series. You'll notice the red icon displayed next to the show title, which confirms that your selection has been scheduled to record.
Microsoft Media Center 4 + If the Video DVD option is not displayed on the Disc Format page, the DVD burning software is not installed or is not working correctly. Contact your hardware manufacturer for assistance. 7. On the Name This DVD page, enter a name for your DVD if you want to change the default setting. For example, to enter the letter “a,” press 2 once. To enter the letter “b,” press 2 twice. An index of all letters is displayed on the screen. Then select OK. 8.
N otebook User Guide You can visit and browse each domain to experience the information and assistance that Media Center offers. For more information, please refer to Microsoft’s website: http://www.microsoft.com/windowsxp/mediacenter/using/gets tarted/default.
Connecting to Peripherals 5 5 Connecting to Peripherals This chapter describes how you attach additional peripheral devices to your notebook. The Everex StepNote allows you to add a printer or mouse; connect an external monitor and keyboard, or other compatible peripheral device. Use of additional devices is described in this chapter.
N otebook User Guide 5.1 Using the USB Port USB (Universal Serial Bus) is a hardware interface that enables you to connect multiple devices (such as printers, mice, keyboards, storage devices, joysticks, digital cameras, and video conference cameras, etc.) to your notebook computer, and up to 127 devices can be attached. Besides, USB’s hot swap capability allows everything to be plugged in and unplugged without turning the system off.
Connecting to Peripherals + 5.2 5 The USB bus distributes 0.5 amps (500 milliamps) of power through each port. For the purpose of power saving, please disconnect your USB device while not in use. Using an External Monitor Port Your computer has a 15-pin Monitor port for supporting any external CRT or LCD color monitor. You need a display signal cable (usually provided with the monitor). One end of the cable must have a 15-pin connector for the system. To connect an external monitor: 1.
N otebook User Guide 5.3 6. If you only want to show the display on the external monitor or projector and shut off the LCD display, you can use the + hot-key to switch display type between LCD and external monitor. Keep pressing the hot-key until you get the display to external monitor only. + Refer to Chapter 3 regarding the possible External CRT resolutions and how to change the display properties.
Connecting to Peripherals 5.4 5 Using the LAN Port This notebook comes with an internal 10Base-T/100Base-TX LAN module that connects your computer to other computers/networks through a local area network (LAN) and supports data transfer rates at 10Mbps and can be up to 100Mbps. The 10Base-T standard also called Twisted Pair Ethernet is connected with RJ-45 connectors. The 100Base-TX is based on the older Ethernet standard.
N otebook User Guide 5.5 Using the Wireless LAN Wireless LAN is the major breakthrough in computer communication technology. It lets user connect to the LAN environment without using any wire to traditional RJ-45 jack. User can enjoy the wireless connection within the range of Access Point (AP) of LAN. Access Point (AP) is the wireless transmission and receiving device, it generally connects to the server of a LAN environment or act as a LAN hub with wireless connection.
Connecting to Peripherals 2. Connect one end of the cable into a standard wall outlet. 3. Connect the other end of the cable into the computer modem port. + The speed of data transmission is dependent on the quality of telephone lines. Digitally terminated lines improve the speed of data transmission. Contact your service provider for more information. + The analog phone cable is an industry standard cable. Longer cables are available at your local electronics store.
N otebook User Guide This page is intended to be blank.
Customizing Your Notebook 6 6 Customizing Your Notebook Your computer uses the Phoenix BIOS Setup program allowing your system configuration to be altered to best suit your computing needs: Useradjustable options include system time and date, disk drive configuration and password setup. BIOS information stored in the CMOS RAM will remain permanent unless changed.
N otebook User Guide 6.1 Running the BIOS Setup Program Your computer is setup and pre-configured. The computer’s BIOS (Basic Input-Output System) Setup program may be used to change system configuration information such as the current date and time, or your hard disk drive type. The Setup program can be accessed when you power on the system and pressing the function key before the Microsoft® Windows® operating system begins.
Customizing Your Notebook 6 • Item Specific Help The right side of the screen. This area describes each parameter and its available settings. • Menu Bar The top line of the screen. Each of the five selections displays its own screen. • Parameters The left side of the screen. This area lists the parameters and their current settings. • Key Status Bar The bottom part of the screen. These lines display the keys available to move the cursor, select a particular function and so forth.
N otebook User Guide 6.2 Using the Main Menu Setup • 80 System Time Allows you to change the system time using the hour:minute:second format of the computer. Enter the current time for reach field and use the , +, or key to move from one field or back to another. You can also change the system time from your operating system.
Customizing Your Notebook 6 • System Date Allows you to set the system date using the month/date/year format. Enter the current time for reach field and use the , +, or key to move from one field or back to another. You can also change the system time from your operating system. • Primary Master This field display various parameters for the hard disk drive. If type [Auto] is selected, the system automatically sets these parameters.
N otebook User Guide 6.2.1 INTERNAL HDD SUB-MENU Use the Type field to select the drive type installed. You can select different drive types as CD-DVD, User, Auto or None by pressing bar. Set this option to Auto so your computer will automatically detect the drive type during power on. Set this option to None when your computer is not installed any devices. Press to return to the Main Menu. 6.2.
Customizing Your Notebook 6 Use the Type field to select the drive type installed. You can select different drive types by pressing bar. Set this option to Auto so your computer will automatically detect the drive type during power on. Set this option to None when your computer is not installed any devices. Press to return to the Main Menu.
N otebook User Guide 6.3 84 Using the Advanced CMOS Setup • Boot-time Diagnostic Screen Lets you specify to display the diagnostic screen or not by choosing Enabled or Disabled option during system booting. • Summary Screen Displays system configuration on boot.
Customizing Your Notebook 6 Lets you reserve memory space [32MB]/[64MB]/[128MB] for UMA frame buffer for video devices. The default value is [32MB]. • Display Device Selection Lets you specify the external display device to LCD, CRT, or LCD+CRT. • Local Bus IDE adapter Lets you set up the integrated local bus IDE adapter to Primary, Secondary, Both or Disabled. • Legacy USB Support Enable or disable the USB Bus support when in connection with USB device.
N otebook User Guide 6.4 86 Security Menu Setup • Supervisor Password Is Set/Clear selections show that the notebook is under controlled by Supervisor Password or not. • User Password Is Set/Clear selections show that the notebook is under controlled by User Password or not.
Customizing Your Notebook 6 • Set Supervisor Password Supervisor password gives you the authority in accessing the setup utility. You also need to enter this password in system booting and resuming from suspend mode. When you press in this field, the Set Supervisor Password dialog box appears. Enter a new password with up to 8 alpha-numeric characters, and then re-enter it for confirmation. • Set User Password This field is only available when Supervisor Password has set.
N otebook User Guide 6.5 Using the Boot Setup This item allows you to set the search drive sequence where the system will try to boot up first. This page allows you to set the search drive sequence where the system will try to boot up first. To select the boot device, you can use the up or down arrow key, then press <+> to move up the device in the list or press <-> to move down the device in the list. To exit from this menu, press .
Customizing Your Notebook 6.6 6 How to Exit the Setup Program There are two choices to escape from the Setup program. • Exit Saving Changes Saves all changes to CMOS while running the BIOS setup program and exit from the system setup program. • Exit Discarding Changes Allows you to discard all changes made while running the BIOS setup program and exit from the system setup program. • Load Setup Defaults Lets you load the default values for all setup items.
N otebook User Guide • 6.7 Save Changes Saves Setup data to CMOS. How to Upgrade the BIOS Your computer uses EPROM Flash BIOS chip that allows you to easily upgrade the BIOS program. When you update the BIOS, any customized settings you made are lost. To upgrade the BIOS: 1. Put in the BIOS Update data into the USB device. 2. Power on the system with the diskette in the diskette drive. 3. On the DOS prompt, type the following command. A:\>Phlash XXXXXX.ROM (BIOS filename) or A:\>XXXXXX.
Using Options 7 7 Using Options This chapter describes the advanced features and expandable architecture in your notebook. For additional system specifications, upgrades and available accessories visit www.everex.com.
N otebook User Guide System Upgrade This section provides some steps in doing system upgrade for your notebook computer. The upgrade procedures include the following: 7.1 Memory Upgrade Your notebook computer offers 200-pin SODIMM (Small Outline Dual Inline Memory Module) at least 256MB DDRII-SDRAM. The memory compartment is located inside your computer. The table below lists the possible combinations of different memory module and memory size.
Using Options 7 INSTALLING MEMORY MODULE Your computer comes with standard 256 MB, 512MB or 1024MB of synchronous DDRII SDRAM. You can increase system memory to a maximum of 2048 MB, by installing two small outline double inline memory modules (SO-DIMMs). 256MB, 512MB And 1024MB memory modules may be used to upgrade your computer memory. To install the memory module: 1. Make sure the system is powered off, the battery also is removed and that no peripheral devices are attached. 2.
N otebook User Guide 5. Insert the connector of the memory module into the socket. Make sure the notch of the memory module fits the nose of the socket. y Hold the memory module at a 30-degree angle and push its connector into the memory socket of the notebook. y Press down on the edge of the memory module until the locking tabs on both sides is locked. 6. Put the DIMM door back and secure the screw on the DIMM door. 7. Turn the system over.
Using Options 7 2. Take out the hard disk from the compartment by finger carefully 3. Remove the connector from the hard disk gently. 4. Remove the crane screws located at each side of the hard disk. 5. Rotate and tighten the crane screws to the new hard disk. 6. Attach the connector to the new hard disk precisely. 7. Place the hard disk back to the compartment. 8. Cover the lid, then rotate and tighten the screws. 9.
N otebook User Guide 7.3 Wireless Module Installation This computer uses mini-PCI wireless LAN module at the bottom of this notebook for wireless connection. + 96 Please contact Everex before adding or changing the wireless module. Any damage that caused by improper installation of the wireless module will void the Everex Standard Warranty Agreement.
Using Options 7 This page is intended to be blank.
Caring for Your Notebook 8 8 Caring for Your Notebook Your Everex StepNote is equipped with the latest features in mobile computing and multimedia technology. If properly cared for and maintained, the performance and reliability of the computer can be greatly prolonged.
N otebook User Guide 8.1 Important Safety Instructions This section gives you detailed information about how to maintain a safe working environment while using the notebook computer. You can maintain its condition and performance by following these guidelines. Please read it carefully to ensure maximum safety. 100 • Before cleaning the notebook computer, make sure it is disconnected from any external power supplies (i.e. AC adapter, car adapter and so on).
Caring for Your Notebook 8 • While unplugging the power cord, disconnect it by the plug head, not by its wire. • Make sure the socket and any extension cords you may use can support the total current load of all the connected devices. • Though your AC adapter is suitable for universal international voltage, it still requires a stable and continual power supply. Make sure the voltage of the power source when connect the notebook computer to the power outlet.
N otebook User Guide ⇓ The notebook computer has dropped and damaged. ⇓ The notebook computer has obvious sign of breakage. • Do not leave this notebook computer in an environment unconditioned. Storage temperature above 60ºC (140ºF) may damage the notebook computer. • An approved power cord has to be used for the notebook computer’s power supply. For a rated current up to 6A and an equipment weight more than 3 kg, a power cord not lighter than H05VV-F, 2G, 0.75mm2, has to be used.
Caring for Your Notebook 8.3 8 Maintaining the LCD Quality When it comes to screen problems, heat plays a significant role. After a typical working session, users routinely close the notebook the cover. The display surface - no matter what type it is - and the components inside the computer radiate heat; when you close the cover, you trap the heat against the screen. To help prolong the life of your computer, leave the cover open for ten minutes while the heat disperses.
N otebook User Guide 8.5 • Use hard disk maintenance programs like Disk Defragmenter of Windows. These reorganize your hard disk by eliminating fragmentation and improving your hard disk access time. • Install a system password in your computer so others won't be able to use the hard disk. Battery Care Guidelines The battery pack furnished with the computer requires reasonable care and handling to ensure efficient operation and maximum life.
Caring for Your Notebook • 8.6 8 You should always discharge your battery before recharging it on either of these two conditions: first, this is the first time you start to use your battery; second, you had not charge the battery for more than 2 months. To discharge the battery, please execute the "Battery Refresh" function in the BIOS Setup Utility.
N otebook User Guide This page is intended to be blank.
System Specification A APPENDIX A System Specification This appendix provides technical specifications for the Everex StepNote computer. Depending on the specific Everex model, specifications may vary.
N otebook User Guide System Specification PROCESSOR UNIT • Intel® Celeron® M Processor Dothan • Above 1.3 GHz CPU • 1MB integrated L2 cache for the processor SYSTEM MEMORY • Two 200-pin memory slots • User-upgradeable to maximum 2GB using 200-pin SODIMM 256MB, 512MB or 1024MB modules • DDRII –533 SDRAM modules LCD DISPLAY • 15.
System Specification • A Maximum 16 million colors on external monitor or projector at 1280x1024 resolution (Non-Interlaced) STORAGE • 2.5” Format 9.
N otebook User Guide FLASH BIOS 512K Flash ROM BIOS for easy BIOS upgrade I/O PORTS • 1 x 15-pin VGA port • 1 x TV-Out Port (S-Video) • 3 x Universal Serial Bus (USB 2.0) • 1 x LAN port • 1 x Modem port WIRELESS DEVICES IEEE 802.11b/g, Mini PCI 802.
System Recovery and Driver Installation B APPENDIX B System Recovery and Driver Installation Appendix B provides information on how to install the Driver Utility and how to restore the software and operating system of your computer back to the original factory settings. In the system recovery section, you will learn how to generate the system recovery disk. Please follow the step-by-step instructions carefully and exercise caution to avoid data loss.
N otebook User Guide B.1 System Recovery USING RECOVERY DISK Before we go on, let’s define some terminologies. Hard disk is divided into RP & UP. RP - Recovery Partition, it stores system files and is hidden by default UP – User Partition, it can be divided into 2 parts (system files area + user data area) Users can choose to recover the system from either hard disk or recovery DVD(s)/CD(s). I. Recovering the System from Hard Disk Two methods are available: a.
System Recovery and Driver Installation 1. B System recovery is done by having system files from RP copied to the system files area in UP, and user data area stays intact.
N otebook User Guide 2. 114 Please click hotkeys F10 or R button to go into recovery mode.
System Recovery and Driver Installation 3. B Please choose between “Non destructive system recovery” & “Destructive system recovery”. When the ”Non destructive” option is chosen , please click Next.
N otebook User Guide 116 4. The last part of recovery processes is to perform a check of all files. Please choose to perform this check or no. If no choice is made before timing out, the default choice is to perform the checks! 5.
System Recovery and Driver Installation B b.
N otebook User Guide 1.
System Recovery and Driver Installation 2. B Please click hotkeys F10 or R button to go into recovery mode.
N otebook User Guide 3. 120 Please choose between “Non destructive recovery mode” & “Destructive recovery mode”. To choose “Destructive” please click Advance.
System Recovery and Driver Installation B 4. Please be warned of the danger of “Destructive Recovery” before clicking on Next 5.
N otebook User Guide 6.
System Recovery and Driver Installation 7.
N otebook User Guide II.
System Recovery and Driver Installation B The “Non destructive” & “Destructive” recoveries from Recovery DVD have the same result as a recovery from Hard Drive. a. “Non Destructive” Recovery from Recovery DVD b. “Destructive” Recovery from Recovery DVD 1. Insert the recovery DVD into the DVD drive, then choose to boot from CD ROM in BIOS.
N otebook User Guide 126 2. Please click R button 3. Please click S, the subsequent processes are just like those in “non destructive” & “destructive” recoveries from hard disk.
System Recovery and Driver Installation B c. Full Recovery from Recovery DVD RP is destroyed, the hard disk is just one big partition 1. Please insert the recovery DVD into the DVD drive, then choose to boot from CD ROM in BIOS. 2.
N otebook User Guide 3. 128 Please click F to go into full recovery mode.
System Recovery and Driver Installation 4. System will be rebooted 5.
N otebook User Guide 130 6. Please click H, 7.
System Recovery and Driver Installation 8. B Then file check is being done.
N otebook User Guide + Caution: After ‘F’ recovery, end user can not perform ‘S’ recovery any more because RP is already destroyed! B.2 Device Drivers Installation If you already have an operating system installed into your notebook computer, it is best to install the needed device drivers for using the built-in devices of your computer. Before installing the drivers, check with your dealer first if they have already installed all the drivers along with the operating system.
System Recovery and Driver Installation B Installing Chipset device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as "E:\Drivers\WinXP\Chipset\Setup.exe". 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click "Next" continuously to install this driver when screen displays this command. 5. Tick the option “I Agree”. And press “Next” to continue the installation. 6.
N otebook User Guide INSTALLING THE AUDIO DEVICE DRIVER Your notebook computer uses the VIA Azalia VT1708A Audio controller. Installing Audio device driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as. "E:\Drivers\WinXP\Audio\Setup.exe" where the audio driver is located. 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click "Next" three times to continue the following steps.
System Recovery and Driver Installation B INSTALLING THE WIRELESS LAN DEVICE DRIVER Please follow the procedures below for installing the Mini PCI Adapter driver: Installing Wireless LAN driver for Windows XP 1. Click the Start button and then click Run. The Run dialog box appears. 2. Click Browse button and specify the directory as "E:\Drivers\WinXP\Wireless LAN\Liteon\setup.exe" 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click "Next" twice to continue the installation.
N otebook User Guide Installing TouchPad driver for Windows XP 1. Click the Start button, then point to Run. The Run dialog box appears. 2. Click the Browse button and specify the directory as. "E:\Drivers\WinXP\TouchPad\Setup.exe " 3. Click "OK" to execute the setup program. The Setup box appears. 4. Click “Next” to continue the installation. 5. Tick the option "Yes, I want to restart my computer now.
T echnical Support TECHNICAL SUPPORT For the latest Product Information, Drivers, and Support Documents visit www.everex.com For complete warranty information, please refer to the Everex Limited Warranty Agreement. To register your product visit www.everex.com or simply email your User Name (first and last), Model (VA4100M, VA4200M, VA4300M,… etc.) and Serial Number to customerservice@everex.com. Please use “Product Registration – VAXXXX” as your email subject.
N otebook User Guide This page is intended to be blank.