- VA2000T Laptop PC USER MANUAL

Notebook User Guide

• Save Changes

Saves Setup data to CMOS.

6.7 How to Upgrade the BIOS

Your computer uses EPROM Flash BIOS chip that allows you to easily

upgrade the BIOS program. When you update the BIOS, any customized

settings you made are lost.

To upgrade the BIOS:

1. Put in the BIOS Update data into the USB device.

2. Power on the system with the diskette in the diskette drive.

3. On the DOS prompt, type the following command.

A:\>Phlash XXXXXX.ROM (BIOS filename) or

A:\>XXXXXX.BAT (Batch file for BIOS file)

Press <Enter> to run this BIOS utility. After the system has been

successfully run this program, a message similar to the following appears:

Flash memory has been successfully programmed,

press any key to restart the system. If the

system does not restart, turn it off, then turn

on again.

4. Press any key to restart this system.

Contact your dealer for the latest BIOS update file.